Loading ...
Loading ...
Loading ...
Chevrolet VOLT Owner Manual (GMNA-Localizing-U.S./Canada/Mexico-
12163007) - 2019 - crc - 6/11/18
262 Vehicle Care
2. For the passenger side bulb,
remove the windshield washer
bottle filler neck by firmly
pulling it straight up and out of
the bottle.
3. Remove the cover from the
back of the headlamp
assembly by turning it
counterclockwise.
4. Remove the bulb socket from
the headlamp assembly by
turning it counterclockwise.
5. Remove the bulb from the
socket.
6. Install the new bulb in the
socket.
7. Install the bulb socket by
turning it clockwise.
8. Install the cover in the back of
the headlamp assembly by
turning it clockwise.
9. For the passenger side,
reinstall the windshield washer
bottle filler neck by firmly
pushing it straight into the
bottle.
Taillamps
Taillamp, Turn Signal, and Reverse
Lamps
1. Reverse Lamp
2. Turn Signal Lamp
3. Taillamp
To replace rear lamp bulbs:
1. Open the hatch.
2. Remove the two Torx
®
screws
and the other screw that
secure the taillamp housing.
3. Pull the taillamp housing away
from the rear of the vehicle to
remove.
4. Select the connector for the
desired bulb on the back of the
taillamp housing.
5. Turn the connector
counterclockwise to remove it
from the taillamp assembly.
6. Remove the bulb from the
taillamp assembly. Hold the
connector and pull on the bulb
to disconnect it from the wiring
harness.
7. Install a new bulb into the
wiring connector.
8. Reinstall the connector by
inserting it into the taillamp
housing and turning clockwise.
Loading ...
Loading ...
Loading ...