Loading ...
Loading ...
Loading ...
— 123 —
Programming
This chapter explains how to program various items.
Before you start programming, select the PGM1, PGM2 or SD CARD mode
from the mode selection screen depending on the item you are going to
program.
Basic Procedure
This section illustrates the basic programming by using an example of programming for departments.
Programming screens
Opening screen: When you select the PGM1, PGM2 or SD CARD mode from the mode selection screen, your
display will show a programming opening screen corresponding to the mode you selected.
Programming menu: Use the cursor keys or numeric keys to select
the desired option and press the
(ENTER)
key, or touch the option on the
screen.
Mode you are in
Numeric key area
Common status area
Numeric key data area
Code selecting screen (Dept. PLU/UPC, Customer):
Code title
Code number and its description:
(In case of PLU/UPC and customer, two lines are used for one
code, upper line - code, lower line - description.)
Use the cursor keys or numeric keys to select the desired option
and press the
(ENTER)
key, or touch the option on the screen. (When
you select the last item, the screen goes to the selected option
screen without pressing the
(ENTER)
key.)
Programming screen:
Selected menu message
Setting items:
Use the cursor to select the desired option or touch it on the
screen.
There are three entry methods described below:
Numeric entry : Use numeric keys.
Character entry : Use character keys.
Selective entry : Press the
key to toggle options and press the
(ENTER)
key to select it, or press the
SBTL
key to show
the options list. Use the cursor keys to move the
cursor and press the
(ENTER)
key to select it, or touch
the option on the screen.
13
(In case of PGM2)
PGM1 MODE
PGM2 MODE
SD CARD MODE
Loading ...
Loading ...
Loading ...