Loading ...
Loading ...
Loading ...
16 TURBOLOCK TL115
It’s highly recommended to leave the door open during installation. And always
keep the bolt extended throughout the installation (Fig. 7).
Step 2. If needed, have someone hold the door itself or hold the outside section at against
the front of the door. Then take out the inside section, and turn the thumb vertically
before installing (Fig. 8).
Step 3. Remove the battery compartment cover on the inside section (Fig. 9).
Step 4. Gently feed the other power cable through the hole of inside section to snap it into
the cable connectors. Then feed the connected power cable into the hole of door
(Fig. 10).
Step 5. Align the mounting holes of inside section with the two round holes near the square hole in latch, then use the two
mounting screws to install the inside section on the door (Fig. 11).
Always keep the bolt extended and the thumb turn vertical throughout the installation (Figs. 7 & 8).
Extended Retracted
Fig. 7
Fig. 8
Compartment
Cover
Fig. 9
Fig. 10
Fig. 11
Mounting Screws
Loading ...
Loading ...
Loading ...