Loading ...
Loading ...
Loading ...
The HI or LO indicator lights and
remains lit until you turn it off by
pushing the opposite side of the
switch lightly. The indicator will turn
off.
Follow these precautions whenever
you use the seat heaters:
Use the HI setting only to heat the
seats quickly. Select the LO
setting when the seats feel warm.
The HI setting draws large
amounts of current from the
battery.
Do not use the seat heaters, even
on the LO setting, if the engine is
left idling for an extended period.
They can weaken the battery,
causing hard starting.In LO, the heater runs continuously.
It does not cycle with temperature
changes.
In HI, the heater turns off when the
seat gets warm, and turns back on
after the seat’s temperature drops. It
continues to cycle as long as you
leave it set on HI. The HI indicator
remains lit as a reminder that you
have the heater on.
Because of the sensors for the side
airbag system, there is no heater in
the passenger’s seat-back.
To use the ski sleeve:
Pull down the rear seat armrest.
Open the trunk pass-through
cover by sliding the knob down-
ward and pulling on the cover.
Theskisleeveallowsyoutocarry
skis or other long objects safely
without soiling or damaging the
interior of your car. It attaches to the
trunk pass-through.
1.
Ski Sleeve
Seat Heaters, Ski Sleeve
Instruments and Controls
96
KKNNOOBB
LLIIDD
01/09/28 19:40:56 31SZ3660_099
Main Menu
Table of Contents
Loading ...
Loading ...
Loading ...