Loading ...
Loading ...
Loading ...
Open the trunk.
Pull the bulb straight out of its
socket.
Push the new bulb straight into
the socket until it bottoms.
Reinstall the socket into the light
assembly by turning it clockwise
until it locks.
Testthelightstomakesurethe
new bulb is working.
Undo the fastener on the side of
the trunk lining by pushing on the
center of the fastener’s head until
it pops in. Pull the lining back. Remove the socket by turning it
one-quarter turn counterclockwise.
Determine which of the four bulbs
is burned out: stop/taillights, back-
up light, or turn signal.
Reinstall the trunk lining. Make
sure it is installed under the edge
of the trunk seal.1.
3.
2.
4.
5.
6.
7.
Replacing Rear Bulbs
Lights
Maintenance
266
FFAASSTTEENNEERR
01/09/28 20:08:54 31SZ3660_269
Main Menu
Table of Contents
Loading ...
Loading ...
Loading ...