Loading ...
Loading ...
Loading ...
Remove the two bolts and the
three nuts with a 7/16 in (10 mm)
wrench, then remove the engine
cover.
Loosen the bleeder bolt on top of
the engine.
Pour Honda All Season
Antifreeze/Coolant Type 2 into
the radiator up to the base of the
filler neck. This coolant is a
mixture of 50 percent antifreeze
and 50 percent water. Pre-mixing
is not required.
The cooling system capacity is:
Tighten the bleeder bolt when
coolant comes out in a steady
stream with no bubbles.
7. 8.
9.
10.
CONTINUED
Cooling System
Maintenance
235
BBOOLLTTSS
BBLLEEEEDDEERR BBOOLLTT
NNUUTTSS
1.61 US gal (6.1 , 1.34 Imp gal)
01/09/28 20:03:50 31SZ3660_238
Main Menu
Table of Contents
Loading ...
Loading ...
Loading ...