Loading ...
Loading ...
Loading ...
Put the new spark plug into the
socket, then screw it into the hole.
Screw it in by hand so you do not
crossthread it.
Use a wrench to remove the two
bolts holding the ignition coil.
Remove the ignition coil by pulling
it straight out.
Remove the spark plug with
a five-eighths inch (16 mm) spark
plug socket.
Disconnect the wire connector
from the ignition coil by pushing
on the lock tab and pulling on the
connector. Pull on the plastic
connector, not the wires.
4. 5.
6.
7.
Spark Plugs
Maintenance
244
IIGGNNIITTIIOONN CCOOIILL
IIGGNNIITTIIOONN CCOOIILL
LLOOCCKK TTAABB
CCOONNNNEECCTTOORR
BBOOLLTTSS
01/09/28 20:05:25 31SZ3660_247
Main Menu
Table of Contents
Loading ...
Loading ...
Loading ...