Loading ...
Loading ...
Loading ...
−
Your dealer will reset this indicator
after completing the scheduled
maintenance. If this maintenance is
done by someone other than your
Acura dealer, reset the indicator as
follows.
Turn off the engine.
For the first 6,000 miles (9,600 km)
after the Maintenance Required
Indicator is reset, it will come on for
two seconds when you turn the
ignition switch ON (II).
Between 6,000 miles (9,600 km) and
7,500 miles (12,000 km) this
indicator will light for two seconds
when you first turn the ignition
switch ON (II), and then flash for
ten seconds.
Press and hold the select and reset
buttons next to the instrument pan-
el, then turn the ignition switch
ON (II).
Hold the buttons for
approximately ten seconds until
the indicator resets.
This indicator reminds you that it is
time to take your car in for
scheduled maintenance.
If you exceed 7,500 miles (12,000
km) without having the scheduled
maintenance performed, this
indicator will remain on as a constant
reminder.
Refer to the Maintenance Schedules
for Normal and Severe Driving
Conditions on pages .
1.
2.
3.
218 222
Gauges
Instruments and Controls
Maintenance Required Indicator
61
SSEELLEECCTT
BBUUTTTTOONN
RREESSEETT
BBUUTTTTOONN
MMAAIINNTTEENNAANNCCEE RREEQQUUIIRREEDD IINNDDIICCAATTOORR
01/09/28 19:35:16 31SZ3660_064
Main Menu
Table of Contents
Loading ...
Loading ...
Loading ...