Loading ...
Loading ...
Loading ...
Cleaning the classic milk frother
Daily cleaning of classic milk frother
Remove the external part of the classic milk frother and rinse it with
fresh water.
Weekly cleaning of classic milk frother and steam wand
1 Remove the external part of the classic milk frother and rinse it
with fresh water.
2 Remove the upper part of the classic milk frother from the steam
wand and rinse it with fresh water.
3 Clean the steam wand with a wet cloth.
4 Reassamble all the classic milk frother parts.
Descaling procedure
When the display shows START CALC CLEAN, you need to descale
the machine. If you do not descale the machine when this message
appears on the display, the machine will eventually stop working
properly. In that case, repairs are not covered by the warranty.
Please use Philips descaler only. Under no circumstances should
you use a descaler based on sulfuric acid, hydrochloric acid,
sulfamic or acetic acid (vinegar) as this may damage the water
circuit in your machine and not dissolve the limescale properly.
Not using the Philips descaler will void your warranty. Failure to
descale the appliance will also void your warranty. You can buy
Philips descaling solution in the online shop at www.saeco.com/care.
The descaling procedure lasts 30 minutes and consists of a
descaling cycle and a rinsing cycle. You can pause the descaling
or rinsing cycle by pressing the escape button. To continue the
descaling or rinsing cycle, press the OK button.
Note: Do not remove the brew group during the descaling procedure.
Warning: Do not drink the descaling solution or the water
dispensed during the descaling procedure.
26
English
Loading ...
Loading ...
Loading ...