Loading ...
Loading ...
Loading ...
Fitting towing hook
When fitting on the rear of the vehicle, the license
plate must be removed.
1. Press the lower edge of the appropriate
plastic cover into the bumper until the cover
disengages.
2. Pull cover out of the bumper and l et it hang by
its thread.
3. Comple tely screw in the towing hook A.
Removing towing hook
1. Unscrew the towing hook A.
2. Insert plastic cover at th e lowe r edge of the
opening.
3. Fold the cover up and press on its upper edge
to engage it in the bumper.
When removing on the rear of the vehicle, the
license plate must be mounted.
Pulling ve hicle onto at bed
1. Position wooden ramps at the base of the flat
bed to reduce the angle of the pull.
2. Reel in the hoist cable and check the underside
of the vehicle for any interference.
288Practical Tips, Emergency Service
Downloaded from www.ManualsFile.com manuals search engine
Loading ...
Loading ...
Loading ...