Loading ...
Loading ...
Loading ...
CHRONO Stopwatch
Function
You can use the stopwatch to measure time
intervals , e.g. on the race circuit o r on work-related
journeys. Meas u red lap times can be stored and
evaluat ed if the vehicle is equipped with Porsche
Communication Management (PCM).
Please observe the chapter “Sport display” in
the separate PCM operating instructions.
Stopwatch on the instrument p anel
The stopwatch has an analogue and a dig ital
display. The large poi nter of the analogue display
measures the seconds. The two small pointers
measure hours and minutes. Th e dis p lay re-starts
at zero after 12 hours. Seconds and increments
of 1/100th of a second can be read on the digital
display. The digital display and the d isplay in the
on-board compute r can indicate up to 99 hours and
59 minutes.
The stopwatch can be swivelled both to the left and
to the right.
Stopw atch displays:
– on the stopwatch on the instrument panel ,
– in the on-board computer menu CHRONO,
– on the perfor mance display in the PCM.
Starting/stopping stopwatc h
All stopwatch displays are start ed and stopped via
the on-board computer menu CHRONO.
Note on operati on
When you leave the CHRONO menu while the
stopwa tch is running, measurement will continue.
The stopwatch stops after the ig nition is switched
off. If the ignition is switched on again within
approx. 4 minutes, the stopwatch will continue
to run.
The only way to reset the stopwatch to zero is by
selecting “Reset” in the CHRONO menu.
Starting the timing
Push operating lever forward. The selection
field is switched on.
Select CHRONO with the operating lever.
Controls, Instruments
115
Downloaded from www.ManualsFile.com manuals search engine
Loading ...
Loading ...
Loading ...