Loading ...
Loading ...
Loading ...
5. Screw filler hose B onto the filler bottle. The
filler bottle is now open.
6. Unscrew valve cap from tire valve F.
7. Remove valve insert E f rom the tire valve with
valve turner D. Keep the valve insert in a clean
and dry place.
8. Remove plug C of the filler hose B.
9. Push filler hose onto the tire valve.
10. Hold filler bottle higher than the level of the tire
valve and press it together forcefully until the
bottle is completel y emptied into the tire.
11. Pu ll filler h ose off the tire valve.
12. Twist the valve i nsert firmly into the tire valve
using the valve turner.
13. Connect the compressor to the cigarette
lighter and inflate the tire to the prescribed tire
pressure.
Please observe the chapter ”TIRE PRESSU RE
FOR COLD TIRES” on page 299.
14. Screw val ve cap onto the tire valve.
15. Ch eck the tire pressure after driving for
around 10 m inutes. If the tire pressure is
less than 22 psi (1.5 bar), do not c ontinue
driving. If a value of more than 22 psi (1.5 bar)
is indicated, correct the pressure to the
prescribed value.
16. Pl ease consult your authorized Porsche
dealer.
Care Instructions
After drying, any sealant that emerges can be
peeled off like a film.
Warning!
Risk of accident resulting in serious personal
injury or death.
Have the tire replaced by an authorized
Porsche dealer immediately.
Avoid hard acceleration and high cornering
speeds.
Do not exceed maximum speed of 50 mph
(80 km/h).
Please always observe the safety and oper-
ating instructi ons, which can be found in the
separate operating inst ructions for the sealant
and on the compressor.
Front jacking point
Lifting the vehicle
Lifting the vehicle wi th a lifting platform or
garage lift
The car must be raised only at the illustrated
jacking points.
252Practical Tips, Emergency Service
Downloaded from www.ManualsFile.com manuals search engine
Loading ...
Loading ...
Loading ...