Loading ...
Loading ...
Loading ...
Changing a wheel
Danger!
Risk of serious personal injury or death. The
car may slip off the jack.
Make sure t h at no one is in the vehicle when
jacking up and changing a wheel.
Always place the car on stable supports if work
has to be carried out under the car.
Warning!
Risk of damage to the brake discs of the
Porsche Ceramic Composite Brake (PCCB).
Always screw in both assembly aids when
changing a wheel.
Note
The tools required for changing a wheel (e.g. jack,
wheel bolt wrench, assembly aids) are no t suppl ied
with the car. They are available at your authorized
Porsche dealer.
1. Fully apply the handbrake, engage 1st gear or
select position P and withdraw the ignition key.
2. Secure the car against rolling away, e.g. by
means of wedges under the wheels on the
opposite side. This is particularly important on
slopes.
Screw in ass embly aid for vehicles without
Porsche Ceramic Composite Brake
3. Slightly slack en the wheel bolts of the wheel to
be changed.
4. Raise the car until t he wheel lifts off the
ground.
Please observe the chapter ”LIFTING THE
VEHICLE” on page 252.
Screw in two assembly aids for vehicles with
Porsche Ceramic Composite Brake
Note on operation
To remove or mount the spacers:
Please observe the chapter ”SPACERS” on
page 257.
5. Remove 1 or 2 wheel bolts (see respe ctive
illustra tion). Screw in assembly aids instead of
the wheel bolts. Remove the remaining wheel
bolts.
6. Take the wheel off and put a new wheel on.
Practi cal Tips, Emergency Service
255
Downloaded from www.ManualsFile.com manuals search engine
Loading ...
Loading ...
Loading ...