Loading ...
Loading ...
Loading ...
20
Attaching the Stand (Type one) (C49J890DK* / C49J892DK*)
―
Before assembling the product, place the product down on a flat and stable surface so that the screen is facing downwards.
: The product is curved. Placing pressure on the product when on a flat surface may damage the product. When the product is on the ground facing up or down, do not put pressure on it.
―
There is a risk of scratch damage if the screwdriver comes in contact with the product surface while fastening the screws. Make sure the screwdriver does not touch the surface.
1
1
1
2
1
3
Caution
Hold the stand neck with both hands, not one hand, to
prevent it from falling off and causing injury.
Remove the Cushion Top and Cushion Front, and then
place the Cushion Front on the desk.
Pull the monitor out of the package (two
people are required for this work), and then
place the monitor on the Cushion Front.
Place the stand neck on the monitor as
shown in the figure.
1
4
1
5
1
6
Caution
Tilt the stand neck to sides to avoid contact with the
screwdriver.
Fasten the screws at the top of the stand neck. Insert the stand base into the stand neck in
the direction as shown in the figure.
Disassemble the COVER-REAR TOP.
1
7
1
8
Assemble the COVER-REAR TOP to the stand neck as
shown in the figure.
Rotate the COVER-REAR TOP clockwise.
Loading ...
Loading ...
Loading ...