Loading ...
Loading ...
Loading ...
802258UK G4 Boiling (& ambient) residential, user guide - August 2015 - V2.01 Page 19 of 24
3. LCD Screen operation - Section G
This mode allows the HydroTap
®
G4 to go into energy saving mode. There
are two options available: sleep mode and on/off mode.
Energy modes
In sleep mode the unit will go to “Sleep” after a 2hr period of inactivity. The
boiling water will gradually drop to either 68°C or room temp, as shown in the
table below and the AMBIENT water will be ON or OFF.
• Press the [MENU] button for main
menu.
• Press the [Settings] button.
• Enter your 4-digit password and
press [Enter].
• Press the [Energy Modes] button.
• Press the [Sleep Modes] button
then in the next screen, use the
up and down arrow to select sleep
mode from the 7 options in the
table below.
It is recommended to recalibrate the lux sensor after selecting any of the
lux sensor options from the sleep mode menu. (See page 15 ,Lux sensor
calibration).(Classic, Arc / Cube only).
Sleep Mode Light
level
Time
delay
State Boiler Chiller
2 Hours > 68
0
C
N/A 2 Hr Sleep 68
0
C ON
2 Hours > OFF
N/A 2 Hr OFF OFF OFF
Lux Sensor > 68
0
C
Dark N/A Sleep 68
0
C ON
Lux Sensor > OFF
Dark N/A OFF OFF OFF
Lux Sensor or 2 Hr > 68
0
C
Dark 2 Hr Sleep 68
0
C ON
Lux Sensor or 2 Hr > OFF
Dark 2 Hr OFF OFF OFF
Disable
N/A N/A ON ON ON
To activate sleep modes
Loading ...
Loading ...
Loading ...