Loading ...
Loading ...
Loading ...
Page 14 of 24 802258UK G4 Boiling (& ambient) residential, user guide - August 2015 - V2.01
• Press the [MENU] button for main
menu.
• Press the [Install] button.
• Press the [Filter Reset] button.
• Press the [Reset Internal Filter] /
[Reset External Filter] button.
• If you need to flush the filter follow
the filter flush guide, see page 13.
• To cancel the filter reset program
press [HOME] or [<=].
• To set the filter life or edit filter
usage, see page 18.
After replacing the filter, the counters should be reset.
• Press the [MENU] button for main
menu.
• Press the [Install] button.
• Press the [Boiling Calibration]
button.
• In the next screen, press
[Calibrate] if you want to start
calibration.
Boiling calibration screen
3. Boiling calibration
• Press the [MENU] button for main
menu.
• Press the [Install] button.
• Press the [Boost] button.
• In the next screen select [YES] to
enable the booster.
Dispense boiling water for 30
seconds and check the (insulated)
outlet hose from the booster is
warm.
This function should only be used when a booster unit is installed.
Booster screen
4. Booster
Note
Failing to make the correct selection for [Boost] will affect product
performance.
2. Filter reset
LCD screen operation - section C
Caution
In general, boiling water units may vent steam from the tap spout.
Take care to avoid personal injury whenever this occurs.
The Zip HydroTap
®
G4 is equipped with a self-calibrating program. On first
start up, the controls take the system through a calibration process. Once
this mode is completed the system reverts back to normal operation. If you
would like to calibrate the system anytime after installed, please follow the
steps below.
Loading ...
Loading ...
Loading ...