Loading ...
Loading ...
Loading ...
32
BEFORE YOU CALL FOR SERVICE
USER WARNINGS
AND DESCRIPTIONS
WHAT TO DO
Too many suds
Machine will stop and flash while waiting for suds
to dissipate. The machine will not beep during this time. When
the suds have dissipated the machine will automatically restart.
If a suds event has occurred during a cycle the machine will
also display this warning at the end of the cycle, to alert you
that this has occurred. This may help to explain any reduction
inperformance.
Check you are using a detergent suitable for front loaders.
Check you are not overdosing the detergent.
Check the standpipe height for the drain does not exceed 1200mm.
Door is locked
The temperature in the drum is over 60°C therefore it is not safe
to open the door. Wait until the temperature drops below 60°C.
Check the water level in the drum. If the level is above the
bottom of the door seal, the door cannot be opened. Use the
‘Add a Garment’ button if you wish to add or remove items.
If the drum is still moving, wait for it to stop before attempting
to open the door.
Door is open
Close the door fully and touch .
Try opening and closing the door again.
Reposition the load, make sure the load is correctly in the drum
and that protruding items are not stopping the door from closing.
Loading ...
Loading ...
Loading ...