Loading ...
Loading ...
Loading ...
25
WASH CYCLE OPTIONS
Wash Boost
Pre Wash
For extra dirty loads you can perform a ‘Pre Wash’. Your washer will start the wash with
a short wash in cool water to remove excess soil. After this the machine will drain and
then fill at the selected temperature for the main wash.
Simply touch the ‘Wash Boost’ button and select ‘Pre Wash’ when choosing your wash
options. Note: ‘Pre Wash’ cannot be selected after a wash cycle has been started, ie
if you touch and try to select ‘Pre Wash’ it will be unavailable. ‘Pre Wash’ must be
selected before the cycle starts.
If you use the ‘Pre Wash’ option, liquid or powdered detergent needs to be placed in the
back right compartment of the dispenser drawer, labelled ‘PRE WASH Liquid/Powder’,
prior to starting the cycle. When you select ‘Pre Wash’, the compartment is flushed at
the start of the cycle.
Rinse+
If you have a particularly dirty load, or you have sensitive skin and wish to give your
clothes an extra rinse, select ‘Rinse+’ from the ‘Wash Boost’ options. Your load will
undergo an extra rinse to get rid of any residual detergent or soil in the items.
Note: ‘Rinse+’ will not be available if the ‘Eco’ option has been selected.
Options
Wrinkle Free
We recommend you remove the clothes from the washer immediately after the
completion of the cycle to minimise wrinkling and creasing of items and to prevent
dye run. However, if you will not be present at the end of the wash you can select
‘Wrinkle Free’.
When ‘Wrinkle Free’ is selected, the washer will tumble the clothes once every
15minutes for up to 12 hours after the cycle has finished. The ‘Wrinkle Free’ light and
button will flash, and the washer will beep at regular intervals to remind you to
remove your load. To remove the load during this phase, simply press the button.
Eco
Use the ‘Eco’ option to save water and energy. Selecting ‘Eco’ will reduce the wash
temperature slightly and alter the wash and rinse programming. Note: ‘Eco’ cannot be
selected after a wash cycle has been started, ie, if you touch and try to select ‘Eco’ it
will be unavailable. ‘Eco’ must be selected before the cycle starts.
Note: this option will not be available if ‘Rinse+’ has been selected.
If you wish to, you can select both ‘Wash Boost’ options of ‘Pre Wash’ and ‘Rinse+’
to perform on the same cycle. Likewise, you can select ‘Eco’ and ‘Wrinkle Free’ to
perform on the same cycle. Touch the appropriate button until both options are
selected. Repeat to deselect an option.
For clothes care and performance reasons not all options are available on all cycles.
Loading ...
Loading ...
Loading ...