Loading ...
Loading ...
Loading ...
Assembling the Unit
46 • N1X Owner’s Manual
3 Mount the main unit.
3-1 Mount the main unit on the speaker box while
aligning the rear of the main unit with the rear
of the speaker box, and each lateral side of the
main unit with the lateral side of the legs.
3-2 Move the main unit slightly toward the rear
side, then adjust its position so that the project-
ing pin on the metal brackets on the bottom of
the main unit will lock into the notch on the
metal brackets of the legs (L/R).
4 Secure the main unit.
Secure the main unit using ten long screws (6 x 30
mm).
5 Connect the speaker cord and pedal
cord.
5-1 Remove the vinyl tie attaching the speaker
cord and pedal cord.
5-2 Insert the speaker cord plug into the connector
so that the tab extends toward the front when
viewed from the rear.
5-3 Insert the pedal cord plug into the pedal con-
nector in the correct orientation.
5-4 Use vinyl ties to bundle the speaker cord and
pedal cord.
6 Attach the speaker net.
6-1 Attach the speaker net.
CAUTION
Be careful not to pinch your fingers when mounting the
main unit.
Hold here.
Connecting the pedal cord
Insert the pedal cord securely until
the metal part of the cord plug disap-
pears from view. Otherwise, the
pedal may not function properly.
5-1
5-4
5-1
5-4
5-2
5-3
n1x_en_om.book Page 46 Friday, October 19, 2018 6:01 PM
Loading ...
Loading ...
Loading ...