Loading ...
Loading ...
Loading ...
Playing Back Songs
26 • N1X Owner’s Manual
1 While holding down [DEMO/SONG], press [+] to select the
desired Song Category (page 25).
2 Press [+] or [-] to select the specific Song number (see “Song
Category List” on page 25), or “*.
rd
” (random) or “*.
AL
”(all).
Song number ............Plays back only the selected Song.
*.
rd
...........................Plays back the Songs of this type continuously
in random order.
*.
AL
...........................Plays back all the Songs of this type continu-
ously in sequential order.
The asterisk (*) indicates “
P
”, “
A
”, “
C
”, “
S
”, “
F
” or “
U
” designation in the dis-
play.
3 Press [>/o] (Play/Pause) to start playback.
During playback, the current measure number (for MIDI Songs) or playing time
(for Audio Songs) is shown on the display.
For information on operations such as Pause, Rewind, Fast Forward, etc., refer to
“Playback-related Operations” on page 27.
4 Press [DEMO/SONG] to stop playback.
If a specific Song number is selected in Step 2, playback stops automatically
when the end of the Song is reached.
Playing Back Songs
To play back a Song on a USB flash drive:
Read “About USB Devices” (page 31), then connect the USB flash drive to the [USB TO DEVICE] terminal, and fol-
low the instructions below.
NOTE
The Song Categories will appear on the
display in the following order:
d
.XX
P
.XX (
A
.XX) (
C
.XX)
(
S
.XX) (
F
.XX)
U
.XX
d
.XX etc.
“
A
.XX”, “
C
.XX”, “
S
.XX” and “
F
.XX” are
shown only when a USB flash drive is con-
nected.
C
.XX and
F
.XX are not displayed
when data does not exist.
NOTE
During playback of a Demo Song, “*.
rd
”
or “*.
AL
” cannot be selected.
NOTE
Song indications such as “
F
.
00
” and
“
C
.
00
” may not appear immediately
depending on the amount of the folders in
the USB flash drive.
NOTE
This instrument can select or play Songs
saved to only the first, second, or third
hierarchical folder level. For details, refer to
page 32.
NOTE
• During Demo Song playback, the current
measure number is not shown on the
display.
• During playback of a MIDI Song, the
Voice of the keyboard performance is
automatically set to the Voice of the MIDI
Song. When you stop playback, the
Voice of the keyboard performance will
be restored to the Voice last selected.
• If you select the Voice “Celesta” (page
17) and then start playback of a MIDI
Song, your keyboard performance will
sound one octave higher than usual dur-
ing playback of the MIDI Song.
• The metronome can be used during play-
back. It will automatically stop when
playback is stopped.
• When playing back External Songs on a
USB flash drive, actual playback is done
in numerical or alphabetical order,
according to the Song titles.
1. 2. 0.01. 0.02.
MIDI Song
Current measure
number
Audio Song
Playing time
Indicates minutes. In
case of 10 minutes or
more, only the lowest
digit is shown.
Indicates
seconds.
n1x_en_om.book Page 26 Friday, October 19, 2018 6:01 PM
Loading ...
Loading ...
Loading ...