Loading ...
Loading ...
Loading ...
en Appliance door
30
Removing and fitting the door panels
To facilitate cleaning, you can remove the glass panels
from the appliance door.
Removing the door panels from the appliance
1. Open the appliance door slightly.
2. Press on the right and left side of the cover (fig. !).
3. Remove the cover (fig. ").
4. Undo and remove the screws on the left and right of
the appliance door (fig. #).
5. Before closing the door again, trap a tea towel that
has been folded several times in the door (fig. $).
Pull out the front panel upwards and lay it on a flat
surface with the door handle facing downwards.
Clean the panels with glass cleaner and a soft cloth.
:Warning – Risk of serious damage to health!
If the screws are loosened, the safety of the appliance
can no longer be guaranteed. Microwave energy may
escape. Never loosen the screws.
Do not unscrew the four black screws on the frame (fig.
%).
:Warning
Risk of injury!
■ Scratched glass in the appliance door may develop
into a crack. Do not use a glass scraper, sharp or
abrasive cleaning aids or detergents.
Risk of injury!
■ The hinges on the appliance door move when
opening and closing the door, and you may be
trapped. Keep your hands away from the hinges.
Fitting the door panels on the appliance
1. Insert the front panel downwards into the retainers
(fig. !).
2. Close the front panel until both upper hooks are
opposite the opening (fig. ").
3. Press the front panel down until it clicks audibly into
place (fig. #)
4. Open the appliance door again slightly and remove
the tea towel.
5. Screw both screws back in on the left and right.
6. Put the cover back in place and press on it until it
clicks audibly into place (fig. $).
7. Close the appliance door.
Caution!
Do not use the cooking compartment again until the
panels have been correctly fitted.
2
1
2
1
Loading ...
Loading ...
Loading ...