User Manual - Page 90

For 2019 FORD GT.

Loading ...
Loading ...
Loading ...
Press the brake pedal and then press
the button for any length of time.
STEERING WHEEL LOCK
The steering wheel locks automatically
when you leave your vehicle and take the
intelligent access key with you. The
steering wheel unlocks automatically when
you enter your vehicle with the intelligent
access key.
Note: You may need to turn the steering
wheel left or right if the wheel does not
unlock completely. This may happen in
certain situations, such as parking your
vehicle on a steep grade.
STARTING THE ENGINE
When you start the engine, the idle speed
increases. This helps to warm up the
engine. If the engine idle speed does not
slow down automatically, have your
vehicle checked by an authorized dealer.
Note: You can crank the engine for a total
of 60 seconds, without the engine starting,
before the starting system temporarily
disables. The 60 seconds does not have to
be all at once. For example, you can crank
the engine three times for 20 seconds each,
without the engine starting, to reach the 60
second time limit. If you exceed the
cranking time, you cannot attempt to start
the engine for at least 15 minutes. After 15
minutes, you have a 15 second time limit to
crank the engine. You need to wait 60
minutes before you crank the engine again
for 60 seconds.
Before starting the engine, check the
following:
Make sure all occupants fasten their
seatbelts.
Make sure the headlamps and
electrical accessories are off.
Make sure the parking brake is on.
Move the transmission selector into
park (P).
Note: Do not touch the accelerator pedal.
Note: You must have your intelligent access
key in the vehicle in order to shift the
transmission out of park (P).
E243956
1. Fully press the brake pedal.
2. Press the Engine START/STOP button.
The system does not function if:
The key frequencies are jammed.
The key battery has no charge.
If you are unable to start the engine, do the
following:
E228717
87
Ford GT (CGX) Canada/United States of America, enUSA, Edition date: 201810, First-Printing
Starting and Stopping the Engine
Loading ...
Loading ...
Loading ...