Loading ...
Loading ...
Loading ...
Method 1: Rear Hatch Storage
Compartment Power Point
Your Ford GT has a 12V power point in the
rear hatch storage area that allows you to
conveniently plug in to charge and
maintain your battery.
Note: You can only the use the hatch
storage power point for battery charging.
The one inside the passenger compartment
on the side of the center console will not
work for this purpose.
E291522
1. Locate and open the cap covering the
power point.
2. Insert the provided charger plug in to
the power point.
3. Connect the charger to the wall socket.
4. Disconnect the charger from the wall
socket before disconnecting the cigar
plug.
Method 2: Under Hood Jump Start
Posts
You can also connect the battery charger
to the posts underneath the front hood for
jump starting the vehicle. The charger
connects simply to the jump start positive
(+) and negative (-) posts as shown in the
following illustration.
Note: If you incorrectly connect the battery
clamps, the reverse polarity protection of
the charger ensures that the battery and
charger are not damaged.
E235907
1. Connect the positive (+) red cable to
the positive (B) post.
2. Connect the negative (-) black cable
to the negative (A) post.
3. Connect the charger to the wall socket.
4. Disconnect the charger from the wall
socket before disconnecting the
battery.
5. Disconnect the black clamp before the
red clamp.
The battery charger and maintainer
charges the battery to a full charge and
then monitors the charge as the car sits. If
the battery charge level drops, the
maintainer turns on to keep the battery
fully charged. You can keep the car stored
with the charger and maintainer attached.
For further information on the charger, see
the instructions provided with the charger.
161
Ford GT (CGX) Canada/United States of America, enUSA, Edition date: 201810, First-Printing
Maintenance
Loading ...
Loading ...
Loading ...