Loading ...
Loading ...
Loading ...
Remote Control
Installing the Batteries for the Remote Control
Install 2 AAA (1.5V) batteries matching the polarity indicated inside battery compartment of the Remote Control.
●
The maximum operable ranges from the Unit are as follows.
–
Line of sight: approx. 23 feet (7m)
–
Either side of the center: approx. 16 feet (5m) within 30°
–
Above: approx. 16 feet (5m) within 15°
–
Below: approx. 10 feet (3m) within 30°
NOTE(S)
●
Do not mix alkaline, standard (carbon-zinc), or rechargeable (ni-cad, ni-mh, Li-ion, etc) batteries.
●
Do not mix old and new batteries.
●
Always remove batteries from the Remote Control if they are dead or if the Remote Control is not to be used for an
extended period of time. This will prevent battery acid from leaking into the battery compartment.
1 2 3
Operating with the Remote Control
A
B
C
D
K
J
L
M
N
E
F
G
H
O
P
Q
R
S
I
Buttons Description
A
B(POWER/Standby) Press to Turn On the
Unit, or to switch the Unit into Standby mode.
(To completely Turn Off the Unit, you must
unplug the AC Power cord.)
B
Press to switch to the Standard preset sound.
C
Press to switch to the preset sound for Sports
scene.
D
Press to switch to the preset sound for Music.
E
Press to Mute the Sound and press again to
Unmute the Sound.
F
Press to select Optical or Coaxial Input of the
connected device to this Soundbar.
If this button is pressed while Optical or
Coaxial is selected, the Current Input Source
will be switched back and forth between the
two Sources.
Buttons Description
G
Press to select Line Input of a connected
device to this Soundbar.
H
Press to select USB Input of a connected
device to this Soundbar.
I
Press to select Auxiliary Input of a connected
device to this Soundbar.
J
Press to adjust Volume Up / Down on the
Soundbar.
K
Press to switch to the preset sound for a
Movie.
L
Press to switch to the preset sound for News
scene.
M
Press to turn Night Mode On/Off.
N
Press to turn Surround On/Off.
O
Press to select Bluetooth signal of a
connected device to this Soundbar.
P
Press to disconnect the currently connected
Bluetooth compatible Device and start pairing
mode to establish a new connection to
another Bluetooth compatible Device.
If no Bluetooth compatible Device is
connected within 2 minutes, press this button
to restart pairing mode. Pairing mode can only
be started when Bluetooth is selected.
Q
Press to Skip Forwards in a music file.
(Bluetooth Mode and USB Mode only)
R
Press to Play or Pause a music file.
(Bluetooth Mode and USB Mode only)
S
Press to Play or Pause a music file.
(Bluetooth Mode and USB Mode only)
– 8 –EN
Loading ...
Loading ...
Loading ...