Loading ...
Loading ...
Loading ...
Choosing Preset Sound
1
Press either , , , , or on the Remote Control to select the desired
preset sound suitable for the Audio that is playing.
2
The LED in the center (OPTICAL/COAXIAL) blinks yellow once.
3
When the preset sound setting is set, LED indicators go back to the current Input.
NOTE(S)
●
Select any Preset Sound according to your preference, regardless of categories.
●
The default Preset Sound is MOVIE.
●
This setting will remain while the Soundbar is in Standby mode.
Night Mode
Night Mode 1
Turns down the Volume on the Subwoofer. It is useful late at night.
1
To switch the unit to Night Mode 1, press
.
Night Mode 2* (Dynamic Range Control)
Adjusts for clarity even when the Volume is Low, by compressing the range of the lowest sound level and the highest sound
level.
1
To switch the unit to Night Mode 2, press and hold
.
*
This function is only effective for Dolby Digital sounds.
*
This function is only available when the Soundbar is connected via Optical or Coaxial.
Mode
LED lighting patterns LED behavior Sound effects
Night Mode 1
AUX PAIR
LINE USB OPTICAL/
COAXIAL
AU
X
US
B OPTICAL
/
CO
AXIAL
On : Flashes 4 times
Off : Flashes twice
On : Lowers the Volume of the Subwoofer.
Off : Outputs the Sound at the same Volume
as the original.
Night Mode 2
AUX PAIR
LINE USB OPTICAL/
COAXIAL
AU
X
US
B OPTICAL
/
CO
AXIAL
On : Flashes 4 times
Off : Flashes twice
On : Turns down loud sounds and turns up
Off : Outputs the Sound at the same Volume
as the original.
Input Source Night Mode 1 Night Mode 2
OPTICAL/COAXIAL
Dolby Digital
p p
PCM
p
-
LINE
p
-
AUX
p
-
USB
p
-
BLUETOOTH
p
-
NOTE(S)
●
The Default setting of both Night Modes is Off.
●
These Settings will remain while the Soundbar is in Standby mode, so again use
to turn the mode from current
mode to the next mode.
– 14 –EN
Loading ...
Loading ...
Loading ...