Loading ...
Loading ...
Loading ...
Playing back a music file through USB Memory Stick
You can enjoy playback of music files which are stored on a USB Memory Stick on this Unit.
Preparing for USB Memory Stick playback
You require the following equipment:
–
A FAT(FAT16)/FAT32 formatted USB Memory Stick
–
A music file which has extension of “WAV”
NOTE(S)
●
WAV files stored in the root directory, or in a folder in the root directory, can be played.
●
Playback is in Alphabetical/Numerical order (Folder/File) names. Files in the same folder will be played
continuously.
●
Playable format is: up to 96KHz/24bit, Stereo, LPCM.
●
Only FAT(FAT16)/FAT32 formatted portable memory is supported.
●
When a music file is playing back, do not remove a USB Memory Stick.
This may cause the corruption of the music file or damage to the USB Memory Stick.
●
If you cannot play music file after the USB Memory Stick is inserted, retry the procedure or please contact Call Center
for further assistance.
●
Some music files stored on some USB Memory Sticks with this unit may not play back.
Playing back a music file
1
Connect your USB Memory Stick with a music file to the USB terminal on the rear of the
Soundbar.
2
Press
on the Remote Control to switch the Soundbar to USB Mode.
●
When the Soundbar connects the USB Memory Stick, the USB indicator will blink rapidly while loading.
AUX PAIR
LINE USB OPTICAL/
COAXIAL
LIN
E
US
B OPTI
CAL
CO
AX
IAL
If the Soundbar successfully completed loading the USB Memory Stick and the music files, the USB indicator will blink
slowly.
AUX PAIR
LINE USB OPTICAL/
COAXIAL
LIN
E
US
B OPTI
CAL
CO
AX
IAL
3
Press on the Remote Control to play a music file on the connected USB Memory Stick.
●
Press
if you want to Pause playback. To go back to playback, press again.
●
You can also use to Skip Backward in a music file and to Skip Forward in a music file.
●
If you press
twice, the music file will go back to the previous music file. Press it repeatedly to go to the previous
music files. The music files will move backward one at a time.
4
To Exit USB Mode, press one of the other INPUT source buttons on the Remote Control.
USB indicator behavior
(The arrow indicates the passage of time.)
The current status of the USB device
1 Remains lit No USB device is connected or during playback.
2 Blinks rapidly USB device recognition is in process.
3 Blinks slowly Playback has been Stopped.
4
Blinks twice N Light
off N Repeats
A USB device is connected; no playable file is found or an
unrecognizable USB device. Make sure that the USB Memory
Stick has been formatted (FAT(FAT16)/FAT32) or supported music
files (“.WAV”) are stored correctly.
5 Remains unlit USB Input is not selected or the Soundbar is in Standby.
– 17 –EN
Loading ...
Loading ...
Loading ...