Loading ...
Loading ...
Loading ...
Auto Standby Function
●
This Soundbar will automatically go into Standby mode for Energy Saving if no Audio Signal has been
input for more than 20 minutes.
●
In order to use the Soundbar again while it is in Standby mode, press
on the Remote Control.
Installing the Soundbar on a Wall
1
Purchase the screws (x 2) by length/diameter below,
now make screw holes on the vertical interior Wall.
9/64"~5/32"/3.5~4mm
>1-3/16"/30mm
5/32"/4mm
5/32"/4mm
7-1/2"/190mm
Molly Anchor
2
Hang the Soundbar over the screws.
~3/16"/5 mm
~3/8"/9 mm
●
There is also Wall Mounting Template in the Setup Manual.
NOTE(S)
Funai is not liable for these types of accidents or injury noted below.
●
Do not mount the Soundbar onto the Wall while your Soundbar is plugged in or Turned On.
It may result in an electrical shock injury.
●
Install the screws on a sturdy vertical Wall. If installed onto a Ceiling or slanted Wall, the
Soundbar may fall which could result in a severe injury.
●
Make sure that the Wall where you are mounting the Soundbar is appropriate. Some mounts
are not designed to be mounted to Walls with steel studs or cinder block construction. If you
are unsure, contact a professional installer.
●
Do not fasten the screws using excessive force. This may damage the product or cause the
product to fall, leading to an injury.
●
Never allow children to climb on or play on the Soundbar.
3-3/4" (95mm)3-3/4" (95mm)
Center line
Wall Mounting Template
– 19 –EN
Loading ...
Loading ...
Loading ...