Loading ...
Loading ...
Loading ...
15
ENGLISH
Setting up TV stations
Memorizing the Channels with Auto
- For Auto program to work, the programming source
must be connected to the TV and the TV must be
receiving programming signals either over-the-air or
from a cable-type service provider.
Press the MENU button and then use D / E button to select
the STATION menu.
Press the G button and then use D / E button to select Auto
program
.
Press the G button and then use D / E button to select
Antenna, Cable.
Press the OK button to begin the channel search.
• Wait for auto program to complete the channel search
cycle before choosing a channel. The TV scans for
over-the-air channels and then channels provided by a
cable service.
[ Note ]
STATION
Auto program
Manual
Edit
Name
OK MENU
STATION
Auto program
Manual
Edit
Name
OK MENU
Antenna
Cable
OK To Start
G
Auto Program
DTV Channel 21
Analog Channels Found
12
Digital Channels Found
Progress(%) 40
MENU : DTV Skip
Wait for max. 10 minutes...
5
• When the channel search is complete, use the
DD
/
E
buttons to review the memorized channels.
• If you press the MENU button in Auto program, the
function will stop and only channels programming up to
that time will remain.
• Auto program function can memorize only the channels
which are being received at that time.
• HDTV reception will only display if the digital signal
transmitted through the cable or satellite service
provider is high definition.
Or if the on air broadcast in your area is transmitted in
high definition and you have a high definition antenna
to receive the signal.
The higher the signal strength, the less likely you are to
experience picture degradation.
Loading ...
Loading ...
Loading ...