Loading ...
Loading ...
Loading ...
English 21
Operation
Flex zone Plus
Cooking Zone 4
Cooking Zone 3
Cooking Zone 2
Cooking Zone 1
The Flex zone is the large cooking area
located on the left side of the hob (see the
gure left) that is specially designed to
accommodate multiple pots and pans of
varying shapes and sizes at once. The Flex
zone has four zones that are operated by
individual inductors, allowing you to cook
regardless of where cookware is placed on a
cooking zone.
With Flex zone Plus, you can use a combination of different cooking zones to
enlarge the cooking area. See the table below for the corresponding button to
touch to activate the different combinations.
Cooking Zone 1 burner 2 burner 3 burner 4 burner
1
2
3
4
NOTE
• When using only one cooking zone, the diameter of the bottom of the
cookware must be less than 14 cm.
• The hob may take 5-10 seconds to recognise the position of cookware.
• Noises may occur while the hob recognise the cookware.
• Do not remove cookware during cooking. For safety purposes, the hob
automatically stops if cookware has been removed for more than 5 seconds.
Power Boost
The Power Boost function makes additional power available to the each cooking
zones. (example : bring a large volume of water to the boil)
Cooking zones Max Boost time
145 mm 10 min
210 mm 10 min
Front or Rear Flex Plus 10 min
Complete Flex Plus 5 min
After these times, the cooking zones automatically return to power level
.
NOTE
In certain circumstances, the Power Boost function may be deactivated
automatically to protect the internal electronic components of the hob.
For example, It is impossible to output max power on Flex zone rear and Flex zone
front at the same time.
Power management
The cooking zones have a maximum power available to them.
If this power range is exceeded by switching on the Power Boost function, Power
Management automatically reduces the power level of cooking zone.
1
2
3
4
• No.1 and No.2 is paired
• No3. and No.4 is paired
The display for this cooking zone alternates
for some seconds between the set power
level and the maximum possible power
level. After then, the display changes from
the set power level to maximum possible
power level.
NZ6000K NZ64N9777_NZ64N7777_DG68-01073A-00_EN+FI+NO+DA+SV.indb 21 2/19/2018 12:02:21 PM
Loading ...
Loading ...
Loading ...