Loading ...
Loading ...
Loading ...
06 Maintenance and specifications
Replacing bulbs
06
}}
235
8. Reconnect the wiring connector to the bulb
holder.
9. Put the cover back into position and rein-
stall the headlight housing.
Extra high beam
2
G032253
1. Remove the headlight housing from the
vehicle (see page 233).
2. Remove the cover over the bulbs (see
page 234).
3. Disconnect the wiring connector from the
bulb holder.
4. Remove the bulb holder from the headlight
housing by pulling it straight out.
5. Insert a new bulb in the holder until it snaps
in place. It can only be inserted in one way.
6. Press the bulb holder into position in the
headlight housing.
7. Reconnect the wiring connector to the bulb
holder.
8. Put the cover back into position and rein-
stall the headlight housing.
Turn signals
G032358
1. Remove the headlight housing from the
vehicle (see page 233).
2. Remove the bulb holder by turning it coun-
terclockwise and pulling it out of the head-
light housing.
3. Pull out the holder to access the bulb.
4. Remove the burned out bulb by pressing it
in slightly and turning it counterclockwise.
5. Press the new bulb into the holder and turn
it clockwise.
6. Reinsert the bulb holder into the headlight
housing and turn it clockwise.
7. Reinstall the headlight housing.
Side marker lights
G032357
NOTE
Before starting to replace a bulb, see the
general information on page 232.
2
Models with optional Active Dual Xenon headlights only.
Loading ...
Loading ...
Loading ...