PROBLEM POSSIBLE CAUSES SOLUTION
3 lamps for power indicator
icker
• The rolling bar is wrapped.
• Temperature is too high or low.
• Clean the rolling bar.
• Move the vacuum to suitable
temperature.
power brush does not work • Brush is trapped by hair or
larger debris.
• Ensure that no hair or other
thread is trapped around the
brush and check brush area for
larger debris.
Running time shortened • Battery needs to be replaced.
• Ambient temperature is too high
or too low.
• Battery is no fully changed.
• Contact the shop or after sales
service to replace the battery fat
the user's own cost.
• Your vacuum should only be
operated in suitable ambient
temperature.
• The battery needs charging.
The vacuum has no suction
power
• The dust cup is full.
• The lter is blocked.
• Suction inlet of brush or other
accessory is blocked
• Parts of the appliance .is not
fully dried after cleaning.
• Clean the dust cup after use to
prevent build ups.
• Remove any dust or debris
from the lter.
• Check for blockages at brush
and other attachment points.
• Ensure that all components are
properly dried after washing.
MAX indicator ickers • The lter or duct are blocked. • Clean the dust lter, dust cup
and air duct.
No charging • Ambient temperature when
charging is too low or too high.
• Charge the machine
under the right temperature
environment(5°-40°).
