JUMP STARTER WITH AIR COMPRESSOR
UIBI
CONTENTS
I、Instructions of Components and Functions ------------------------- 2
II、Instructions of Button and Display ---------------------------------3
III、Operational Instructions ------------------------------------------4
IV、List of Accessories ---------------------------------------------- 6
VI、VI、Some FAQs ------------------------------------------------ 7
Warnings:
Warranty Includes
1. If the product is stored for more than 3 months, it requires charging.
allowed to be put into water or disassembled or reconstructed without
permission.
connected to the positive and negative poles, so as to avoid melting of the
appropriate equipment; in case of contact with skin, wash immediately with
soap and clear water; and in case of contact with eyes, rinse eyes with cold
running water for at least 10 minutes and seek medical attention immediately.
after your purchase.
team directly at sales@uibi.com.cn, we will do our best to solve the problem
within 24 hours.
1
I、Instructions of Components and Functions
1. Instructions of component buttons
SET Button: Air Pump Setting Button
+: Air Pressure Increase Button or Up Switch Button
-: Air Pressure Decrease Button or Down Switch Button
2. Function instructions
pressure detection and pump and lighting.
2
II、Instructions of Button and Display
1. Touch the Button to display power ("1" in the Figure), air pressure unit ("2"), pump type ("3")
pump mode, and
3. The product will enter the dormant state automatically 30 s after the load is removed;
4. Air pump mode setting
setting mode: pump type ("3" in the Figure), preset air pressure value ("4") and air pressure
of the icon;
4.2 I
4.3 After setting the pump
after 5 s.
4.4 Press and hold the OK Button for 2 s to enter the pump
pump; press any button
pump; and the pump
5. When selecting the pump mode ("3" in the Figure: basketball, bicycle, e-bike, and car), the preset
air pressure values of the system will be displayed, which are:
Basketball: 7 PSI
Bicycle: 10 PSI
E-bike: 29 PSI
Car: 36 PSI
Attention: Please adjust the air pressure standard in combination with the actual model when pump.
pump
3
III、Operational Instructions
1. Instructions for charging the product engine (TYPE-C)
2. Instructions for 12V
value + Standby";
to its display error;
4
the engine with 5V/3A fast charge. Please charge at 0 ~ 50 °C.
2.4 Turn the vehicle ignition switch to the START position;
2.5 After the
3. Instructions for charging electronic products such as phones/tablet PC
3.3 Connect the charging connector to electronic products such as phones/tablet PC;
3.4 Touch
the LED light.
5. Instructions of tire pressure detection
pump pipe to the engine;
5.2 Connect the other end of the pump pipe to the tire and press the Locking Button;
5.3 At this time, the value in the display window is the current actual tire pressure.
6. Operational Instructions for tire pump
6.1 Connect the pump
5
IV、List of Accessories
6.2 Select the pump type and set the pressure and air pressure unit (refer to Point 4 of the
6.3 Connect the pump pipe to the tire, press the Locking Button, place the engine on the
6.4 When the air pressure reaches the set value, the engine will automatically stop pump;
6.5 Open the Locking Button and remove the pump pipe.
Remarks: (1) In the process of continuous use for a long time, the forced protection of
the engine will be caused by high temperature. At this time, the engine stops output and
The protection will be automatically released after the temperature drops, and the display
lock the button, and follow the above operation.
6
No. Accesso Nam Qty
1
1
1
1
1
1
1
Engine1
2 Sma
clam
3 In
ation pip
4 Charge USB cabl
5 Multi-functional air nozzl
Manual6
7 Storage ba
V21egatlovgnitratS
USBoutput/QC3.0Output
5V/3A,9V/2A,and12
V/1.5A
VI、Some FAQs
ging is over, the engine will enter auto sleep to save power.
2. Q: How long does it take to charge the engine?
A: It takes about 6 hours to fully charge with USB-5V/3A charger.
A: 6 times if the air pressure of vehicle tire (195/65R15) ranges from 0 PSI to 36 PSI.
8.0 L/DIESEL vehicles up to 6.0 L.
5. Q: What is the life of the engine?
A: It can be used for 3 ~ 5 years under normal conditions.
7. Q: What phenomena may appear in the pump of the new engine?
(2) When the product is used for a long time, it will enter the protection state due to high temp-
ion will be automatically released after being placed at room temperature for a period of time.
7
Charge mode/Type-c Input 5V/3A
A0521tnerruCtratS
A0002tnerruCkaeP
Gas Engines/Diesel Engines 8.0/6.0
Product capacity 16,000mAh(59.2Wh)
Pump
pressure(bar) 10bar/150PSI
Pump
time(min)(195/65r15tire) ≤5min
Product dimension(mm) 214*125*53.7(mm)
Temperature range(°C)
-4
℉
~140
℉
8
UIBI
Made in China
