OWNER’S MANUAL
®
Warning, Safety & Maintenance
Table of Contents
Important Safety Instructions
When using exercise equipment, you
should always take basic precautions,
including the following:
m
m
m
m
m
m
m
m
m
m
m
m
m
Personal Safety During Assembly
m
m
m
Obtaining Service
Retain this Owner’s Manual for future
reference. If you need to order replacement
parts please be prepared to provide the
following information when contacting us so
that we can assist you better.
1. Model Number
2. Place of Purchase
3. Serial Number (S/N)
4. Part # and Description
Preparation
Required Tools
m
m
m
m
m
m
Installation Requirements
Assembly Tips
Part# Size Description Quantity
S2IOT Hardware List
Part# Size Description Quantity
S2IOT Hardware List
S2IOT Hardware Illustration
S2IOT Hardware Illustration
S2IOT Hardware Illustration
S2IOT Hardware Illustration
S2IOT Hardware Illustration
S2IOT Hardware Illustration
S2IOT Parts List/Illustration
PART A--BOTTOM CROSS BRACE,1PCS.
PART B--REAR FRAME,1PCS.
PART C--AUXILIARY FRAME,2PCS.
PART D--CONNECT FRAME,1PCS.
PART E--SUPPORT FRAME,1PCS.
PART F--RIGHT LEG ARM,1PCS.
PART G--LEFT LEG ARM,1PCS.
PART H--PIVOT AXLE 392mm,1PCS.
PART J--PIVOT AXLE 308mm,1PCS.
PART K--ADJUSTABLE CAM,1PCS.
PART L--CAM SUPPORT FRAME,1PCS.
PART M--LEG PAD PIVOT BRACKET,2PCS.
S2IOT Parts List/Illustration
PART N--RIGHT HANDLE FRAME,1PCS.
PART P--BACK SEAT FRAME,1PCS.
PART Q--LEFT HANDLE FRAME,1PCS.
PART R--PIVOT ACTUATOR FRAME,1PCS.
PART WA--WEIGHT STACK FRAME,1PCS.
PART WB--METAL SHROUD 1163mm,1PCS.
PART WC--METAL SHROUD 1213mm,1PCS.
PART WD--CHROME GUIDE ROD,2PCS.
ĭ19X1229mm
PART WE--FRONT SHROUD,1PCS.
S2IOT Parts List/Illustration
S2IOT Parts List/Illustration
ƶ
ƶ;
ƶ;
S2IOT Parts List/Illustration
PART WF--BACK SHROUD,1PCS.
PART WG--TOP SHROUD,1PCS.
Notes
STEP
1
Be careful to assemble all components
in the sequence they are presented.
NOTE:
Finger tighten all hardware ! r st in this step. Wrench tighten ALL hardware at the end of
STEP 1D. Some components may be pre-assembled. Nylon lock nuts will not fully screw
onto bolts, they must be wrench tighten to fully go on.
STEP
1
CA
WA
C
B
P
STEP
2
Be careful to assemble all components
in the sequence they are presented.
NOTE:
Finger tighten all hardware ! r st in this step. Wrench tighten ALL hardware at the end of
STEP 2C. Some components may be pre-assembled. Nylon lock nuts will not fully screw
onto bolts, they must be wrench tighten to fully go on.
STEP
2
J
A
L
K
H
STEP
3
Be careful to assemble all components
in the sequence they are presented.
NOTE:
Finger tighten all hardware ! r st in this step. Wrench tighten ALL hardware at the end of
STEP 3F. Some components may be pre-assembled. Nylon lock nuts will not fully screw
onto bolts, they must be wrench tighten to fully go on.
D
R
H
G
E
B
J
F
STEP
3
STEP
4
Be careful to assemble all components
in the sequence they are presented.
NOTE:
Finger tighten all hardware ! r st in this step. Wrench tighten ALL hardware at the end of
STEP 4B. Some components may be pre-assembled. Nylon lock nuts will not fully screw
onto bolts, they must be wrench tighten to fully go on.
STEP
4
F
N
M
Q
M
G
D
STEP
5
Be careful to assemble all components
in the sequence they are presented.
NOTE:
Finger tighten all hardware ! r st in this step. Wrench tighten ALL hardware at the end of
STEP 5H. Some components may be pre-assembled. Nylon lock nuts will not fully screw
onto bolts, they must be wrench tighten to fully go on.
STEP
5
WD
WA
WD
STEP
6
Be careful to assemble all components
in the sequence they are presented.
NOTE:
Finger tighten all hardware ! r st in this step. Wrench tighten ALL hardware at the end of
STEP 6D. Some components may be pre-assembled. Nylon lock nuts will not fully screw
onto bolts, they must be wrench tighten to fully go on.
STEP
6
,
,
,
41
,
WA
K
L
STEP
7
Be careful to assemble all components
in the sequence they are presented.
NOTE:
Wrench tighten ALL hardware at the end of
Each Step. Some components may be pre-as-
sembled. Nylon lock nuts will not fully screw onto bolts, they must be wrench tighten to
fully go on.
STEP
7
WF
WB
WE
WG
WC
WA
STEP
8
Be careful to assemble all components
in the sequence they are presented.
NOTE:
Finger tighten all hardware ! r st in this step. Wrench tighten ALL hardware at the end of
STEP 8D. Some components may be pre-assembled. Nylon lock nuts will not fully screw
onto bolts, they must be wrench tighten to fully go on.
STEP
8
M
P
M
D
Notes
S 2 I O T E x p l o d e d V i e w
www.bodysolid.com
Copyright 2009. Body-Solid. All rights reserved. Body-Solid reserves the right to change design and speci! cations when we feel it will improve the product.
Body-Solid machines maintain several patented and patent pending features and designs. All rights reserved on all design patents and utility patents.
®
