BAUMR-AG LGSELEBM3M8A 10 Tonne Electric Hydraulic Wood Log User Manual

User Manual

[Revision 4.0 December 2023]

READ THIS MANUAL CAREFULLY BEFORE USE – FAILURE TO DO SO MAY RESULT IN INJURY, PROPERTY DAMAGE AND MAY

VOID WARRANTY. • KEEP THIS MANUAL FOR FUTURE REFERENCE. • Products covered by this manual may vary in appearance,

assembly, inclusions, specifications, description, and packaging.

HPS3800E Electric Log Splitter

Safety

Safety messages are designed to alert you to possible dangers or hazards that could cause death, injury or

equipment or property damage if not understood or followed. Safety messages have the following symbols:

You WILL be KILLED or

SERIOUSLY INJURED if you do

not follow instructions.

You CAN be KILLED or

SERIOUSLY INJURED if you do

not follow instructions.

You CAN be INJURED if you do

not follow instructions or equipment

damage may occur.

It is vital that you read and understand this

user manual before using the product,

including safety warnings, and any assembly

and operating instructions. Keep the manual

for future reference.

Safety precautions and recommendations

detailed here must be fully understood and

followed to reduce the risk of injury, fire,

explosion, electrical hazard, and/or property

damage.

Safety information presented here is generic

in nature – some advice may not be

applicable to every product. The term

"equipment" refers to the product, be it

electrical mains powered, battery powered or

combustion engine powered.

• Before Use - If you are not familiar with the

safe operation/handling of the equipment or

are in any way unsure of any aspect of

suitability or correct use for your

application, you should complete training

conducted by a person or organization

qualified in safe use and operation of this

equipment, including fuel/electrical handling

and safety.

• Do NOT operate the equipment in

flammable or explosive environments, such

as in the presence of flammable liquids,

gases, or dust. The equipment may create

sparks or heat that may ignite flammable

substances.

• Keep clear of moving parts.

• Equipment may be a potential source of

electric shock or injury if misused.

• Do NOT operate the equipment if it is

damaged, malfunctioning or is in an

excessively worn state.

• Do NOT allow others to use the equipment

unless they have read this manual and are

adequately trained.

• Keep packaging away from children - risk

of suffocation! Operators must use the

equipment correctly. When using the

equipment, consider conditions and pay

due care to persons and property.

General Work Area Safety

• Work areas should be clean and well it.

• Do not operate the equipment if

bystanders, animals etc are within

operating range of the equipment or the

general work area.

• If devices are provided for connecting dust

extraction / collection facilities, ensure

these are connected and used properly.

Dust collection can reduce dust-related

hazards.

General Personal Safety

• Wear appropriate protective equipment

when operating, servicing, or when in the

operating area of the equipment to help

protect from eye and ear injury, poisoning,

burns, cutting and crush injuries. Protective

equipment such as safety goggles,

respirators, non-slip safety footwear, hard

hat, hearing protection etc should be used

for appropriate equipment / conditions.

Other people nearby should also wear

appropriate personal protective equipment.

Do not wear loose clothing or jewellery,

which can be caught in moving parts. Keep

hair and clothing away from the equipment.

• Stay alert and use common sense when

operating the equipment. Do not over-

reach. Always maintain secure footing and

balance.

• Do not use the equipment if tired or under

the influence of drugs, alcohol, or

medication.

• This equipment is not intended for use by

persons with reduced physical, sensory, or

mental capabilities.

General Fuel Safety

• Petrol/fuel/gasoline is extremely flammable

– keep clear of naked flames or other

ignition sources.

• Do not spill fuel. If you spill fuel, wipe it off

the equipment immediately – if fuel gets on

your clothing, change clothing.

• Do NOT smoke near fuel or when

refuelling.

• Always shut off the engine before

refuelling.

• Do NOT refuel a hot engine.

• Open the fuel cap carefully to allow any

pressure build-up in the tank to release

slowly.

• Always refuel in well ventilated areas.

• Always check for fuel leakage. If fuel

leakage is found, do not start, or run the

engine until all leaks are fixed.

General Carbon-Monoxide Safety

• Using a combustion engine indoors CAN

KILL IN MINUTES. Engine exhaust

contains carbon-monoxide – a poison you

cannot smell or see.

• Use combustion engines OUTSIDE only,

and far away from windows, doors, and

vents.

General Equipment Use and Care

• The equipment is designed for domestic

use only.

• Handle the equipment safely and carefully.

• Before use, inspect the equipment for

misalignment or binding of moving parts,

loose components, damage, or any other

condition that may affect its operation. If

damaged, have the equipment repaired by

an authorised service centre or technician

before use.

• Prevent unintentional starting of the

equipment - ensure equipment and power

switches are in the OFF position before

connecting or moving equipment. Do not

carry equipment with hands or fingers

touching any controls. Remove any tools or

other items that are not a part of the

equipment from it before starting or

switching on.

• Do not force the equipment. Use the

correct equipment for your application.

Equipment will perform better and be safer

when used within its design and usage

parameters.

• Use the equipment and accessories etc. in

accordance with these instructions,

considering working conditions and the

work to be performed. Using the equipment

for operations different from those intended

could result in hazardous situations.

• Always keep equipment components

(engines, hoses, handles, controls, frames,

housings, guards etc) and accessories

(cutting tools, nozzles, bits etc) properly

maintained. Keep the equipment clean and,

where applicable, properly lubricated.

• Store the equipment out of reach of

children or untrained persons. To avoid

burns or fire hazards, let the equipment

cool completely before transporting or

storing. Never place or store the equipment

near flammable materials, combustible

gases, or liquids etc.

• The equipment is not weather-proof, and

should not be stored in direct sunlight, at

high ambient temperatures or locations that

are damp or humid.

• Do not clean equipment with solvents,

flammable liquids, or harsh abrasives.

• For specific equipment safety use and care,

see Equipment Safety.

BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG

HPS3800E Electric Log Splitter

General Electrical Safety

• Inspect electrical equipment, extension

cords, power bars, and electrical fittings for

damage or wear before each use. Repair or

replace damaged equipment immediately.

• Ensure all power sources conform to

equipment voltage requirements and are

disconnected before connecting or

disconnecting equipment.

• When wiring electrically powered

equipment, follow all electrical and safety

codes.

• Always use a Residual Current Device

(RCD) (GFCI) / Earth Leakage Circuit

Breaker / Safety Switch when operating this

item (electrical items only).

• High voltage / high current power lines may

be present. Use extreme caution to avoid

contact or interference with power lines.

Electrical shock can be fatal.

General Electrical Safety

• Electrically grounded equipment must have

an approved cord and plug and be

connected to a grounded electrical outlet.

• Do NOT bypass the ON/OFF switch and

operate equipment by connecting and

disconnecting the electrical cord.

• Do NOT use equipment that has exposed

wiring, damaged switches, covers or

guards.

• Do NOT use electrical equipment in wet

conditions or in damp locations.

• Do NOT use electrical cords to lift, move or

carry equipment.

• Do NOT coil or knot electrical cords, and

ensure electrical cords are not trip hazards.

General Service Information

• The equipment must be serviced or

repaired at authorised service centres by

qualified personnel only.

• Replacement parts must be original

equipment manufacturer (OEM) to ensure

equipment safety is maintained.

• Do NOT attempt any maintenance or repair

work not described in this manual.

• After use, the equipment and components

may still be hot – allow the equipment to

cool and disconnect spark plugs and/or

electrical power sources and/or batteries

from it before adjusting, changing

accessories, or performing repair or

maintenance.

• Do NOT adjust while the equipment is

running.

• Perform service-related activities in suitable

conditions, such as a workshop.

• Replace worn, damaged or missing

warning/safety labels immediately.

Child Choking Hazard!

• WARNING: CHOKING HAZARD - CHILDREN UNDER 8 YRS. CAN CHOKE OR SUFFOCATE ON SMALL PARTS. ADULT

SUPERVISION REQUIRED.

• Carefully inspect anything a baby or child could gain access to, including this product & packaging.

• Dangers include anything of a size that could become stuck or lodged in a baby or child's airway.

• Dangers include things like raw, hard fruit and vegetable pieces, large pieces of meat, bones or sausage skins, popcorn, nuts,

hard lollies and corn chips, small magnets and batteries, coins, beads, marbles and small uninflated balloons, broken toys and smaller toys,

buttons, keys and coins. But there are also many more.

• Pay particular attention to accessories, nuts, bolts, screws, washers, caps, covers, loose parts, parts that could be removed or break off, pieces

of packaging, staples, tape etc.

• In the case of any doubt, secure the item of concern in an appropriate manner, or completely remove the possibility of access by a baby or child.

Understand Your Log Splitter

Read and understand the owner's manual and labels affixed to the log splitter. Learn its application and limitations as well as the specific potential

hazards peculiar to it.

Drugs, Alcohol and Medication

Do not operate the log splitter while under the influence of drugs, alcohol, or any medication that could affect your ability to use it properly.

Avoid Dangerous Conditions

• Put the log splitter on a 60 - 75cm high, stable, flat, and level work bench where there is plenty of room for handling, and help the operator stay

alert. Bolt the log splitter to the work surface if it tends to slip, walk, or slide.

• Keep your work area clean and well lighted. Cluttered areas invite injuries.

• Do not use the log splitter in wet or damp areas or expose it to rain.

• Do not use it in areas where fumes from paint, solvents or flammable liquids pose a potential hazard.

Inspect Your Log Splitter

• Check your log splitter before turning it on. Keep guards in place and in working order. Form a habit of checking to see that keys and adjusting

wrenches are removed from tool area before turning it on.

• Replace damaged, missing, or failed parts before using it.

Dress Properly

• Do not wear loose clothing, gloves, neckties, or jewellery (rings, wrist watches). They can be caught in moving parts.

• Protective electrically non-conductive gloves and non-skid footwear are recommended when working. Wear protective hair covering to contain

long hair, preventing it from get caught in machinery.

Protect Your Eyes and Face

• Any log splitter may throw foreign objects into the eyes. This can cause permanent eye damage. Always wear safety goggles. Everyday

eyeglasses have only impact resistant lenses. They are not safety glasses.

• Do not put the log splitter on the ground for operations. This is awkward operating position that the operator has to bring his face close to the

machine, and thus risks being struck by wood chips or debris.

BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG

HPS3800E Electric Log Splitter

Extension Cords

• Improper use of extension cords may cause inefficient operation of the log splitter which can result in overheating. Be sure the extension cord is

no longer than 10m and its section is no less than 2.5mm2 to allow sufficient current flow to the motor.

• Avoid use of free and inadequately insulated connections. Connections must be made with protected material suitable for outdoor use.

Avoid Electrical Shock

• Check that the electric circuit is adequately protected and that it corresponds with the power, voltage, and frequency of the motor.

• Check that there is a ground connection, and a regulation differential switch upstream.

• Ground the log splitter. Prevent body contact with grounded surfaces: pipes, radiators, ranges, and refrigerator enclosures.

• Never open the pushbutton box on the motor. Should this be necessary, contact a qualified electrician.

• Mark sure your fingers do not touch the plug's metal prongs when plugging or unplugging the log splitter.

Keep Visitors and Children Away

• The log splitter must be always operated by one person only. Other people should keep a safe distance from the work area, especially when the

log splitter is under operations. Never use another people to help you with freeing jammed log.

Inspect Your Log

• Make sure there are no nails or foreign objects in logs to be split. The ends of the logs must be cut square. Branches must be cut of flush with the

trunk.

Don't Overreach

• Floor must not be slippery.

• Always keep proper footing and balance.

• Never stand on log splitter. Serious injury could occur if the tool is tipped or if the cutting tools is unintentionally contacted. Do not store anything

above or near the log splitter where anyone might stand on the tool to reach them.

Avoid Injury from Unexpected Accident

• Always pay full attention to the movement of the log pusher.

• Do not attempt to load the log on until the log pusher has stopped.

• Keep hands out of the way of all moving parts.

Protect Your Hands

• Keep your hands away from splits and cracks which open in the log. They may close suddenly and crush or amputate your hands.

• Do not remove jammed logs with your hands.

Don't Force Tool

• It will do a better and safer job at its design rate. Never try to split logs larger than those indicated in the specifications table. This could be

dangerous and may damage the machine.

• Don't use log splitter for a purpose for which it was not intended.

Never Leave Tool Running Unattended

• Don't leave tool until it has come to a complete stop.

Disconnect Power

• Unplug when not in use, before adjusting, changing parts, cleaning, or working on the log splitter. Consult technical manual before servicing.

Protect The Environment

• Take used oil to an authorized collection point or follow the stipulations in the country where the log splitter is used.

• Do not discharge into drains, soil, or water.

Maintain Your Log Splitter with Care

• Keep the log splitter clean for best and safest performance.

Make The Workshop Childproof

• Lock the shop. Disconnect master switches. Store the log splitter away from children and others not qualified to use it.

BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG

HPS3800E Electric Log Splitter

Safety Symbols

The product may have safety warning labels attached to it, explained below. Understand the symbols on your

product and their meanings. If any stickers become unreadable, unattached etc., replace them.

Flammable Material Hazard

Flammable liquids, gases, or

substances etc may present.

Avoid ignition sources and open

flames. Danger of fire.

Read User Manual

Read and fully understand

product safety warnings,

operation, procedures etc before

using the product.

Use Hand Protection

Wear appropriate hand protection

and take due care as the product

or use of the product may present

hand hazards.

Carbon-Monoxide Hazard

Do not use the product in

confined areas or without

adequate ventilation. Carbon-

monoxide poisoning can be fatal.

Electrocution / Electrical Shock

Hazard

High voltage or high current

electricity may be present or

required by the product. Take

due care when handling electrical

products, cables, plugs and

leads. Electrical shock can be

fatal.

Toxic Fumes / Dust Hazard

Using the product or by-products

from use may produce fumes,

smoke or particles that could be

harmful if inhaled. Wear

appropriate breathing protection

and have adequate ventilation.

Explosive Material Hazard

Combustible liquids, gases, or

substances etc may be present.

Avoid ignition sources and open

flames. Danger of explosion.

Cutting / Amputation Hazard

The product may have blades,

edges or mechanical devices that

can cause severe cut injury to

fingers, limbs etc. Take due care

when handling and using the

product.

Crush Hazard

The product may have blades,

edges or mechanical devices that

can cause severe crush injury to

fingers, limbs etc. Take due care

when handling and using the

product.

Single Operator Only

The product must be operated by

a single person only. More than

one person operating the product

may introduce additional hazards.

Use Face Protection

Wear appropriate full-face

protection and take due care as

the product or use of the product

may present face and eye

hazards.

Use Foot Protection

Wear appropriate foot protection

and take due care as the product

or use of the product may present

foot hazards.

Use Eye / Ear / Head Protection

Wear appropriate eye and / or

ear and / or head protection and

take due care as the product or

use of the product may present

eye, hearing, and head hazards.

Running Hazard

Do not run on or near the product

as doing so may present a fall

hazard.

Diving Hazard

Do not dive into the product as

doing so may present a neck /

head injury hazard.

Adult Supervision Required

Always supervise children and

other users of a product to

prevent drowning or injury.

Skin Penetration / Puncture

Hazard

The product may produce

pressure, emit liquids or objects

that can cause severe injury to

fingers, limbs, blood etc. Take

due care when handling and

using the product.

Hot Surface Hazard

Be aware that the product may

produce high temperatures and

hot surfaces that can cause burn

injuries.

Flying Debris Hazard

Be aware that the product or use

of the product may present

hazards produced by flying

debris. Wear appropriate clothing

and protective devices.

Moving Parts Hazard

Be aware that the product

contains or uses mechanical

devices that move or rotate.

Always wait for moving parts to

stop fully before handling the

product, adjusting, maintenance

etc.

BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG

HPS3800E Electric Log Splitter

Carbon-Monoxide Hazard

Do not use the product in

confined areas or without

adequate ventilation. Carbon-

monoxide poisoning can be fatal.

Pull Hazard

Be aware that the product

contains or uses mechanical

devices that can pull in objects

and can cause severe injury to

fingers, limbs etc. Take due care

when handling and using the

product.

Slope / Fall Injury Hazard

Be aware that using the product

on sloping surfaces or in slippery

conditions may present additional

dangers from falls and contact

with blades, moving parts, hot

surfaces etc.

"Slam Dunk" Warning

Do NOT attempt "slam dunk"

manoeuvres as this may result in

severe injury due to falling,

product breakage or collapse etc.

Electrocution / Electrical Shock

Hazard - Outdoor

High voltage or high current

electricity may be present or

required by the product. Do NOT

use in rain, damp, or wet

conditions. Electrical shock can

be fatal.

Electrocution / Electrical Shock

Hazard - Disconnect

High voltage or high current

electricity may be present or

required by the product. Always

disconnect the product from the

electrical supply before handling

the product, adjusting,

maintenance etc.

Power Line Electrocution

Hazard

High voltage / high current power

lines may be present. Use

extreme caution to avoid contact

or interference with power lines.

Electrical shock can be fatal.

"Kick-Back" Hazard

High level of "kick-back" hazard

that can cause the machine to

suddenly rotate towards operator.

Kick-back injury can be fatal.

Winch Operator Position

Hazard

Do NOT stand between winch

and load. Do NOT use winch to

move people.

Winch Lift Hazard

Do NOT LIFT load vertically. Use

machine to PULL only.

Cable Hazard

Ensure that load bearing cable is

not kinked or knotted.

Winch Cable Hazard

Ensure that there is a minimum

number of cable coils on

winching mechanism.

Winch Hook Hazard

Carry hook to load – do NOT

throw or run.

Flash / Blinding Hazard

Wear appropriate eye protection

for welding. Direct exposure to

weld arcs may cause permanent

eye injury.

Laser Hazard

Laser may be in use – do NOT

look directly at laser or allow

others to.

Choking Hazard

Children under 8 yrs. Can choke

or suffocate on small parts. Adult

supervision required.

BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG

HPS3800E Electric Log Splitter

Table of Contents

Safety ............................................................................................................................................................. 2

Safety Symbols ........................................................................................................................................................... 5

Set Up and Preparation for Operation ........................................................................................................ 8

Operation ..................................................................................................................................................... 10

Log Splitter Operation ............................................................................................................................................... 10

Freeing a Jammed Log ............................................................................................................................................. 11

Maintenance ................................................................................................................................................ 13

Replacing the Hydraulic Oil ...................................................................................................................................... 13

Sharpening the Wedge ............................................................................................................................................. 13

Troubleshooting ......................................................................................................................................... 14

Specifications ............................................................................................................................................. 15

BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG

HPS3800E Electric Log Splitter

Set Up and Preparation for Operation

1. Bolt the Support Leg to the Log Splitter, lift the log splitter by the handles at both ends and place it on a 60 -

75cm high, stable, flat, and level work surface.

2. Familiarize yourself with the controls and features of this log splitter in the illustrations.

No. Name No. Name

1 Log pusher 9 Pushbutton box

2

Worktable

10

Wheels for minor moving ONLY

3

Wedge

11

Hydraulic control lever

4

Lift handle

12

Control lever guard

5

Support leg

13

Bleed screw (shown on next page)

6 Log retaining plates 14 Oil drain bolt w/ dipstick (shown on next page)

7 Switch 15 Max pressure limiting screw (DO NOT ADJUST)

8

Motor

BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG

HPS3800E Electric Log Splitter

IMPORTANT! Before operating the log splitter, the Bleed Screw (part #13 shown above) should be

loosened by some rotations until air can go in and out of the oil tank smoothly. Air flow thru the Bleed

Screw hole should be detectable during the log splitter is under operations. Before moving the log

splitter, make sure the Bleed Screw is tightened to avoid oil leaking from this point.

FAILURE TO LOOSEN THE BLEED SCREW WILL KEEP THE SEALED AIR IN HYDRAULIC SYSTEM

BEING COMPRESSED AFTER BEING DECOMPRESSED. SUCH CONTINUOUS AIR COMPRESSION AND

DECOMPRESSION WILL BLOW OUT THE SEALS OF THE HYDRAULIC SYSTEM AND CAUSE PERMANT

DAMAGE TO THE LOG SPLITTER.

DO NOT ADJUST THE MAX PRESSURE LIMITING SCREW!

Max pressure was set before the log splitter ex work and the max pressure limiting screw is sealed with

glue to ensure the log splitter works under pressure no more than 10 tons. The setting was done by

qualified mechanics with professional instruments.

Unauthorized resetting will cause the hydraulic pump to fail to output enough splitting pressure or

RESULT IN SERIOUS INJURY AS WELL AS DAMAGE TO THE MACHINE.

DO NOT ADJUST THE

MAX PRESSURE

LIMITING SCREW!

BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG

HPS3800E Electric Log Splitter

Operation

This log splitter is a home use model. It is designed for operating under ambient temperatures between

+5°C and 40°C and for installation at altitudes no more than 1000m above M.S.L. The surrounding

humidity should less than 50% at 40°C. It can be stored or transported under ambient temperatures

between -25°C and 55°C.

Log Splitter Operation

This log splitter is equipped with "ZHB" control system that requires to be operated by both hands of the user -

Left hand controls the hydraulic control lever while right hand controls the push button switch.

The log splitter will freeze upon absence of either hand. Only after both hands release the controls, the log

pusher starts to return backward to the starting position.

The splitting force and speed are governed by the 2-stage control lever. Push the lever in the 1st stage

about halfway for faster speed at less splitting force to split usual logs; Push the lever in the 2nd stage all

way for maximum splitting force at slower speed to split particularly hard and seasoned logs. These stages

can be shifted by simply raising and lowering the lever.

Never force the log splitter for more than 5 seconds by keeping pressure on it to split excessively hard

wood.

After this time interval, the oil under pressure will be overheated and the machine could be damaged.

For such extremely hard log, rotate it by 90° to see whether it can be split in a different direction. In any case, if

you are not able to split the log, this means that its hardness exceeds the capacity of the machine and thus that

log should be discarded to protect the log splitter.

Always set logs firmly on the log retaining plates and work table. Make sure logs will not twist, rock, or

slip while being split. Do not force the blade by splitting the log on the upper part. This will break the

blade or damage the machine.

BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG

HPS3800E Electric Log Splitter

Break log in the direction of its growing grain. Do not place log across the log splitter for splitting. It may be

dangerous and may seriously damage the machine.

Do not attempt to split 2 pieces of logs at the same time. One of them may fly up and hit you.

Freeing a Jammed Log

1. Release both controls.

2. After the log pusher moves back and completely stops at its starting position, insert a wedge wood under the

jammed log.

3. Start the log splitter to push the wedge wood to go completely under the jammed one.

4. Repeat above procedure with sharper slope wedge woods until the log is completely freed.

BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG

HPS3800E Electric Log Splitter

Do not try to knock the jammed log off. Knocking about will damage the machine or may launch the log

and cause accident.

BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG

HPS3800E Electric Log Splitter

Maintenance

Replacing the Hydraulic Oil

Replace the Hydraulic oil in the log splitter after every 400 hours

of use. Take following steps to replace it.

1. Make sure all moving parts stops and the log splitter is

unplugged.

2. Unscrew Oil Drain Bolt with Dipstick to remove it.

3. Turn the log splitter on the Support Leg side over an 8 litres

capacity container to drain the hydraulic oil off.

4. Turn the log splitter on the motor side.

5. Refill fresh hydraulic oil at the volume as per the hydraulic oil

capacity of a particular model indicated in above

specifications table.

6. Clean the surface of Dipstick on the Oil Drain Bolt and put it

back into the oil tank while keep the log splitter vertically.

7. Make sure the level of the refilled oil is just between 2 grooves

around the Dipstick.

8. Clean the Oil Drain Bolt before thread them back. Make sure

they are tightened to avoid leakage before place the log

splitter horizontally.

Periodically check oil level to ensure it is between 2 grooves

around the Dipstick. Upon Lower oil level, oil refilling is

required.

Following hydraulic oils or equivalent are recommend for the log

splitter's hydraulic transmission system:

•

SHELL Tellus 22

•

MOBIL DTE 11

•

ARAL Vitam GF 22

•

BP Energol HLP-HM 22

Sharpening the Wedge

After using the log splitter for some time, sharpen the wedge of the log splitter using a fine-toothed file and

smooth any burrs or crushed area along the cutting edge.

BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG

HPS3800E Electric Log Splitter

Troubleshooting

PROBLEM PROBABLE CAUSE SUGGESTED REMEDY

Failure to split logs

Log is improperly positioned.

Refer to Log Splitter Operation section

for perfect log loading.

The sizes or hardness of the log

exceeds the capacity of the machine.

Reduce the log sizes before splitting it

on the log splitter.

Wedge cutting edge is blunt.

Refer to Sharpening the Wedge

section to sharpen the cutting edge.

Oil leaks. Locate leak(s) and

Unauthorized adjustment was made

on Max. Pressure Limiting Screw.

Lower max pressure rating was set.

Contact the manufacturer or an

authorised service centre.

The log pusher moves jerkily, emits

unfamiliar noise or vibrating a lot

Lack of hydraulic oil and excessive air

in the hydraulic system.

Check oil level for possible oil refilling.

Contact the manufacturer or an

authorised service centre.

Oil leaks around cylinder ram or

from other points.

Air sealed in hydraulic system while

operating.

Loosen Bleed Screw by a few

rotations before operating the log

splitter.

Bleed Screw is not tightened before

moving the log splitter.

Tighten the Bleed Screw up before

moving the log splitter.

Oil Drain Bolt with Dipstick is not tight.

Tighten the Oil Drain Bolt with

Dipstick.

Hydraulic Control Valve Assembly and

/ or seal(s) worn.

Contact the manufacturer or an

authorised service centre.

BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG

HPS3800E Electric Log Splitter

Specifications

Max Splitting Force 10 Tonnes

Max Splitting Log Length 520mm

Log Diameter 320mm

Wedge Hardened steel

Cycle Time Slow Speed (23 sec), Fast Speed (14 sec)

Hydraulic Oil Capacity 6.5L

Hydraulic Oil Type AW22

IP Rating IP54

Power Plug SAA

BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG

Some experts believe that the incorrect or prolonged use of almost any

product may cause serious injury or death. To help reduce your risk of

serious injury or death, refer to the information below. For more information,

see www.datastreamserver.com/safety



Consult all documentation, packaging,

and product labelling before use. Note

that some products feature

documentation available online. It is

recommended to print and retain the

documentation.



Before each use, check the product for

loose/broken/damaged/missing parts,

wear, or leaks (if applicable). Never use a

product with

loose/broken/damaged/missing parts,

wear, or leaks.



Products must be inspected and serviced

(if applicable) by a qualified technician

every 6 months. This is based on

average residential use by persons of

average size and strength, and on a

property of average metropolitan size.

Use beyond these recommendations may

require more frequent

inspections/servicing.



Ensure that all users of the product have

completed a suitable industry recognised

training course before being allowed

access to the product.



The product has been supplied by a general merchandise

retailer that may not be familiar with your specific

application or description of application. Be sure to attain

third-party approval from a qualified specialist for your

application before use, regardless of any assurances from

the retailer or its representatives.



This product is not intended for use where fail-safe

operation is required. As with any product (for example,

automobile, computer, toaster), there is the possibility of

technical issues that may require the repair or

replacement of parts, or the product itself. If the possibility

of such failure and the associated time it may take to

rectify could in any way inconvenience the user, business,

or employee, or financially affect the user, business, or

employee, then the product is not suitable for your

requirements. This product is not intended for use where

incorrect operation or a failure of any kind, including but

not limited to, a condition requiring product return,

replacement, parts replacement, or service by a

technician may cause financial loss, loss of employee

time or an inconvenience requiring compensation.



If this product has been purchased in error when

considering the information presented here, contact the

retailer directly for details of their returns policy, if

required.

ideas, diagrams, or images may be reproduced or transmitted in any form or by any means, electronic or

mechanical, including photocopying, scanning, or recording, or any information storage and retrieval system,

without express permission or consent from the publisher.

BAUMR-AG LGSELEBM3M8A 10 Tonne Electric Hydraulic Wood Log Splitter HPS3800E

Product's Documents

Product manual

Specifications

BAUMR-AG LGSELEBM3M8A Questions and Answers