Loading ...
Loading ...
3 | Page
Safety and Installation Instructions
GRILL INSTALLATION
This gas grill must be installed in accordance with all local codes.
If installation is planned in an area with no local codes, the gas grill must be
installed in accordance with the National Fuel Gas Code ANSI Z223.1 and
storage and handling of liquefied petroleum gases, ANSI/NFPA 58 or CSA
B149.1 natural gas and propane installation code.
WARNING: Improper installation, adjustment, alteration, service or
maintenance can cause injury or property damage, and void the warranty.
Read the installation, operating and maintenance instructions thoroughly
before installing or servicing this equipment.
NOTE: This appliance is not intended for commercial use.
FOR YOUR SAFETY
1. If you smell gas:
2. Shut off gas to the appliance.
3. Extinguish any open flames.
4. Open lid.
5. If odor continues, immediately
call your gas supplier.
!!! WARNING !!!
Read the “Lighting Instructions” in
this manual, before lighting this
appliance.
NOTE: The manufacturer cannot be held responsible for damage or injury
cause by improper use of this appliance.
NOTE: Do not leave the unit under the sun with the protective film (where
applicable) on for a long period of time as it will make the film difficult to
remove and/or leave markings on the materials which are not covered by
warranty.
Loading ...
Loading ...
Loading ...