Loading ...
Loading ...
Loading ...
Leak Testing
NEVER USE AN OPEN FLAME TO CHECK FOR LEAKS.
All gas piping and connections must be tested for leaks after installation or service. All leaks
must be corrected immediately. Remember-before exchanging an empty
bottle for a new one,
make sure all control valves are in the “off” position.
With the LP regulator connected to tank and grill and the grill knobs turned to OFF. Open the
valve on the tank. Test for leaks by applying liquid soap solution to all joints. Bubbles forming
indicate gas leak. Fix gas leak before continuing use.
Burner Adjustments
Every grill is thoroughly checked for proper lighting and burner flame pattern. Conditions at the
location may necessitate minor adjustment of the burner air intake, if the flames are not
steady/stable as shown in the figure.
The flame should be full length of the burner, blue and stable. The air intake (if applicable) should be
adjusted ONLY if the flame is lifting off of the ports or has noticeable amounts of yellow in
the flame.
20 | P ag e
Loading ...
Loading ...
Loading ...