Loading ...
Loading ...
Loading ...
8. Hold down (D) for at least two seconds to
return to the Timekeeping Mode.
●
To stop the alarm
To stop the alarm after it starts to sound when
an alarm time is reached, press any button.
Note
●
A beeper will sound for 10 seconds to
let you know when the alarm time is
reached.
●
You can also use G-SHOCK MOVE to
configure alarm time settings.
Enabling the Hourly Time
Signal
1. Enter the Alarm Mode.
l
Navigating Between Modes
2. Press (C) to display the hourly time signal
screen ([SIG]).
3. Press (E) to toggle the hourly time signal
between enabled (on) and disabled (off).
●
[SIG] (hourly time signal) is shown on
the display while the hourly time signal
is enabled.
4. Hold down (D) for at least two seconds to
return to the Timekeeping Mode.
Note
●
You can also use G-SHOCK MOVE to
configure the hourly time signal
setting.
Turning Off an Alarm or the
Hourly Time Signal
To stop an alarm or the hourly time signal from
sounding, perform the steps below to turn it
off.
●
To have an alarm or hourly time signal
sound again, turn it back on.
Note
●
Indicators are displayed while any of
the alarms or the hourly time signal is
turned on.
●
The applicable indicators are not
displayed while all of the alarms are
turned off and/or the hourly time signal
is turned off.
Hourly time signal Alarm
1. Enter the Alarm Mode.
l
Navigating Between Modes
2. Use (C) to scroll through the alarm ([-1] to
[-5]) and hourly time signal ([SIG]) screens
until the one you want to turn off is
displayed.
Alarm number
[AL] or [SIG]
3. Press (E) to turn off the displayed alarm or
the hourly time signal.
●
Each press of (E) toggles between ON
and OFF.
●
Turning off all alarms will cause [ALM]
(alarm) to disappear from the display,
while disabling the hourly time signal
causes [SIG] (hourly time signal) to
disappear from the display.
4. Hold down (D) for at least two seconds to
return to the Timekeeping Mode.
Note
●
If [ALM] (alarm) is still displayed after
you turn off an alarm, it means that at
least one of the other alarms is still
turned on. To turn off all of the alarms,
check Graphic Indicator B to find out
which alarms are turned on, and then
repeat steps 2 and 3 until all the
Graphic Indicator B segments and the
[ALM] (alarm) indicator are no longer
displayed.
Hand Alignment
Adjustment
Strong magnetism or impact can cause the
time indicated by the analog hands to become
different from the time on the digital display. If
this happens, adjust hand alignment.
Adjusting Hand Alignment
1. Enter the Timekeeping Mode.
l
Navigating Between Modes
2. Hold down (A) for at least five seconds.
Release the button when [12:00] starts to
flash.
This enables adjustment of the hour and
minute hands.
After five secondsAfter 3.5 seconds
3. If the hour and minute hands are not at 12
o’clock, use (E) and (B) to align them.
4. Press (A) to complete the setting
operation.
Watch Operation Guide 5641
21
Loading ...
Loading ...
Loading ...