Loading ...
Loading ...
Loading ...
Stopwatch
The stopwatch measures elapsed time in
1/100-second units for the first hour, and in 1-
second units after that for up to 24 hours.
In addition to normal elapsed time
measurements, the stopwatch also lets you
take split time and lap time readings.
You can also measure distance and pace.
Note
●
If a measurement operation continues
for 36 hours, it will stop automatically
and [F] will flash on the display.
●
Whenever you record a lap or split
time, the watch creates a record. The
record include the following
information: Measurement start date
and time, the time and pace of each lap
or split, and the total distance and total
calories burned.
●
Up to 45 split time and lap time records
can be stored in watch memory. When
the stored data of one measurement
operation exceeds 44 records, no
additional split time or lap time data
can be saved. The 45th record is saved
when the stopwatch is reset to all zeros
after stopping the measurement
operation.
●
You can use the Recall Mode to view
the latest measurement data.
l
Viewing Data Records
●
You can use G-SHOCK MOVE to view
past measurement data.
●
If the watch is connected with your
phone, ending a measurement
operation and performing a reset will
cause the measured log data to be
sent automatically to G-SHOCK
MOVE.
You will not be able to start the next
measurement operation until the
transfer is complete.
●
You cannot use G-SHOCK MOVE
operations to refresh or send all
settings while a Stopwatch Mode
measurement operation is in progress.
Split Times and Lap Times
●
Split time
A split time is the time elapsed from the start,
up to any point along the course of an event.
E
A
A
E
Goal
Split 3
Split 2
Split 1
Start
●
Lap time
A lap time shows the time elapsed during a
specific lap around a track, etc.
E
A
A
E
Goal
Lap 3
Lap 2
Lap 1
Start
Measuring Elapsed Time
1. Enter the Stopwatch Mode.
l
Navigating Between Modes
2. Use the operations below to measure
elapsed time.
E
E
E
E
Stop
Resume
Stop
Start
●
Elapsed time is shown in 1/100-second
units for the first hour of the
measurement. After the first hour,
elapsed time is shown in one-second
units.
Stopwatch number
Stopwatch number
After first hourFirst hour
1/100 seconds
Seconds Seconds
Minutes
Hours, minutes
3. Press (A) to reset the measurement time
to all zeros.
Watch Operation Guide 5641
15
Loading ...
Loading ...
Loading ...