Loading ...
Loading ...
Loading ...
UTD2000 Series User Manual
48
Vertical
tolerance
1~255 Set vertical tolerance of template through multifunctional knob.
Back Return to previous menu (Pass/Fail Test Menu).
(8) Start the test, press F1 to conduct Pass/Fail test.
10.2 Recorder
Record the current waveform frame by frame through waveform recording function.
Table 10-6 Waveform Recording Menu
Function
Menu
Setting Description
●
Record button, press this button to record, the number of recorded screen displays
on the screen.
■
Stop recording
1, Replay button.
2, Press this button to replay, the replayed frame number displays on the screen,
rotate the multifunctional knob to stop replaying, if keep rotating the knob, a
particular frame of waveform will be replayed repeatedly.
3, If users need to continue replaying all, first press ■ and then press
.
4, Record 1000 frames of data at most.
Access Only when the storage device is plugged in DSO can users use this function.
Return Go to previous menu (Utility menu).
Table 10-6 Waveform Recording Access Menu
Function
Menu
Setting Description
File name Please refer to “Edit file name”for operating method.
Save Store the recorded waveform file in storage device.
Load Load the recorded file in storage device to DSO.
——
Only when the USB is plugged into DSO can users use this function, enter next
menu.
Reutrn Return to previous menu.
10.3 AUTO strategy
As mentioned before, press AUTO button to activate the function of Waveform Auto Setting.
To get a best diplay waveform, DSO automatically adjust vertical scale, horizontal time
base and trigger mode based on input signals. This DSO allow users to set relevant
parameters of auto setting function.
Loading ...
Loading ...
Loading ...