Loading ...
Loading ...
Loading ...
UTD2000 Series User Manual
46
Chapter X Utility System
Press UTILITY to enter utility menu.
Figure 10-1 Function Key of UTILITY
Table 10-1 Utility menu (Page 1)
Function menu Setting Description
System Config
See chart
10-3
Enter system setup menu, the operation option include self-clibration,
system information and clear information.
Language Select interface language, different languages can be selected.
Pass/Fail See chart
10-4
Enter pass/fail menu, please see “10.1 Pass/Fail”for specific operation.
Recorder
See chart
10-5
Enter waveform recording menu, please see 10.2 Recorder”for specific
operation.
Next Go to next page.
Table 10-2 Utility menu (Page 2)
Function menu Setting Description
Cymometer
OFF Turn off frequency meter.
ON Turn on frequency meter.
Local square wave It can be set as 10Hz, 100Hz, 1kHz, 10kHz, it defaults at 1kHz.
AUTO strategy
Enter AUTO strategy setting, the AUTO status can be set, please refer to
“10.3 AUTO strategy”for specific operation.
LAN setup Enter the dialog box of network setting.
Return
Table 10-3 System setup menu (Page 3)
Function menu Setting Description
Self calibration
SELECT Execute self calibration function.
MENU Leave self-calibration function.
System information
Display DSO system information, including Model, Hardware Version,
Software Version, etc. Press MENU button to close system information.
Clear information Clear the stored data in DSO.
Return Go to previous menu.
Loading ...
Loading ...
Loading ...