Hikvision DS-K3Y411X User Manual

Loading ...

Note

The barrier material may aect the device working. Select a correct barrier material or the

barrier may not open.

Lane Length

The width of the lane. You can set the lane width.

Note

The lane width may aect the device working. Set a correct lane width or the barrier may not

open.

Do Not Open Barrier in Authencates in Lane

If there is someone or something in the lane, the gate will not open even if the credenal is

authencated.

This funcon is designed to avoid more than one person passing through the gate with only

one

authencaon.

Opening/Closing Barrier Speed

Set the barrier's opening and closing speed. You can select from 1 to 10. The greater the

value, the faster the speed.

Note

The recommended value is 6.

Click OK.

7.7.2

Congure Device Parameters

Aer adding the access control device, you can set its parameters such as network parameters.

Set RS-485 Parameters

You can set the access control device's RS-485 parameters including the baud rate, data bit, the

stop bit, parity type, ow control type, communicaon mode, work mode, and connecon mode.

Steps

Note

The RS-485 Sengs should be supported by the device.

Enter the Access Control module.

On the navigaon bar on the le, enter Advanced Funcon → More Parameters .

Select an access control device in the device list and click RS-485 to enter the RS-485

Sengs

page.

DS-K3Y411X Series Flap Barrier User Manual

Loading ...

Hikvision DS-K3Y411X Value Flap Barriers