Loading ...
Loading ...
Loading ...
2.
Select an access control device on the le panel, and then click to show the doors or oors of
the selected device.
3.
Select a door or oor to show its parameters on the right page.
4.
Edit the door or
oor parameters.
Note
s
The displayed parameters may vary for dierent access control devices.
Name
Edit the card reader name as desired.
Exit Buon Type
You can set the exit buon as remaining closed or remaining open. Usually, it is remaining
open.
Open Duraon
Aer swiping the normal card and relay acon, the me for locking the door starts working.
Door Le Open Timeout Alarm
The alarm can be triggered if the door has not been closed in a congured me period. If it is
set as 0, no alarm will be triggered.
Super Password
The
specic person can open the door by inpung the super password.
5.
Some of the following parameters are not listed in the Basic Informaon page, click Advanced to
edit the parameters.
Duress Code
The door can open by
inpung the duress code when there is duress. At the same me, the
client can report the duress event.
Dismiss Code
Create a dismiss code which can be used to stop the buzzer of the card reader (by entering
the dismiss code on the keypad).
Note
●
The duress code, super code, and dismiss code should be dierent.
●
The duress code, super password, and the dismiss code should be dierent from the
authencaon password.
●
The length of duress code, super password, and the dismiss code is according the device,
usually it should contains 4 to 8 digits.
6.
Click OK.
7.
Oponal: Click Copy to , and then select the door(s) to copy the parameters in the page to the
selected doors(s).
DS-K3Y411X Series Flap Barrier User Manual
68
Loading ...
Loading ...
Loading ...