Hikvision DS-K3Y411X User Manual

Loading ...

Note

The door's status duraon sengs will be copied to the selected door(s) as well.

Congure Parameters for Card Reader

Aer adding the access control device, you can congure its card reader parameters.

Steps

Click Access Control → Advanced Funcon → Device Parameter .

In the device list on the

le, click to expand the door, select a card reader and you can edit the

card reader's parameters on the right.

Edit the card reader basic parameters in the Basic

Informaon page.

Note

The displayed parameters may vary for dierent access control devices. There are part of

parameters listed as follows. Refer to the user manual of the device for more details.

Name

Edit the card reader name as desired.

Minimum Card Swiping Interval

If the interval between card swiping of the same card is less than the set value, the card

swiping is invalid. You can set it as 0 to 255.

Alarm of Max. Failed

Aempts

Enable to report alarm when the card reading aempts reach the set value.

Card Reader Type/Card Reader Descripon

Get card reader type and descripon. They are read-only.

Oponal: Some of the following parameters are not listed in the Basic Informaon page, click

Advanced to edit the parameters.

Enable Card Reader

If enabling the

funcon, user can present card on the card reader. If disabling the funcon,

the card reader for entrance cannot be used.

OK LED Polarity/Error LED Polarity/Buzzer Polarity

Set OK LED Polarity/Error LED Polarity/Buzzer LED Polarity of main board according to the

card reader parameters. Generally, adopts the default sengs.

Buzzing Time

Set the card reader buzzing me. The available me ranges from 0 to 5,999s. 0 represents

connuous buzzing.

Max. Interval When Entering PWD

DS-K3Y411X Series Flap Barrier User Manual

Loading ...

Hikvision DS-K3Y411X Value Flap Barriers