Hikvision DS-K3Y411X User Manual

Loading ...

Chapter 4 General Wiring

Note

●

Aer maintenance, you should close the water-proof cover over the high/low voltage module.

●

When you should maintain or disassemble the high voltage modules, you should remove the

enre high voltage modules and maintain it outside the turnsle. You should unplug the cables

that connected to the peripherals before maintenance to avoid destroy of the device.

4.1 Components Introducon

By default, basic components of the turnsle are connected well. The pedestals can communicate

by wiring the

interconnecng cables. And the turnsle supports wiring the AC electric supply for

the whole system's power supply.

Note

The voltage uctuaon of the electric supply is between 100 VAC and 240 VAC, 50 to 60 Hz.

The picture displayed below describes each component's posion on the turnsle.

Note

The diagram is for reference only.

DS-K3Y411X Series Flap Barrier User Manual

Loading ...

Hikvision DS-K3Y411X Value Flap Barriers