Hikvision DS-K1T321EWX User Manual

Loading ...

Enable M1 card and authencang by presenng M1 card is available.

M1 Card Encrypon

M1 card encrypon can improve the security level of authencaon.

Sector

Enable the funcon and set the encrypon sector. By default, Sector 13 is encrypted. It is

recommended to encrypt sector 13.

Enable EM Card

Enable EM card and authencang by presenng EM card is available.

Note

EM card is supported when the device connects a peripheral card reader that supports

presenng EM card.

Enable DESFire Card

The device can read the data from DESFire card when enabling the DESFire card funcon.

Enable FeliCa Card

The device can read the data from FeliCa card when enabling the FeliCa card funcon.

Set RS-485 Parameters

You can set the RS-485 parameters including the peripheral, address, baud rate, etc.

Tap → Access Control → RS-485 .

Tap Save to save the sengs aer the conguraon.

Peripheral Type

Select a peripheral from the drop-down list according the actual situaon. You can select from

Card Reader, Extension Module, or Access Controller.

Note

Aer the peripheral is changed and saved, the device will reboot automacally.

RS-485 Protocol

Private

The device can connect with the third party device via RS-485.

OSDP

Standard RS-485 protocol.

RS-485 Address

Set the RS-485 Address according to your actual needs.

DS-K1T321 Series Face Recognion Terminal User Manual

Loading ...

Hikvision DS-K1T321EWX Value Series Face Access Terminal