Hikvision DS-K1T321EWX User Manual

Loading ...

Select System Sengs → Comm. (Communicaon) to enter the Communicaon sengs page.

On the Communicaon sengs page, select Wi-Fi.

Figure 7-3 Wi-Fi Sengs

Enable the Wi-Fi funcon.

Select a Wi-Fi from the list, and enter the Wi-Fi's password. Tap OK.

Note

Only digits, leers, and special characters are allowed in the password.

Set the Wi-Fi's parameters.

By default, DHCP is enable. The system will allocate the IP address, the subnet mask, and the

gateway automacally.

If disable DHCP, you should enter the IP address, the subnet mask, and the gateway manually.

Press OK to save the sengs and go back to the Wi-Fi tab.

Press ESC to save the network parameters.

7.2.3 Set ISUP Parameters

Set ISUP parameters and the device can upload data via ISUP protocol.

Before You Start

Make sure your device has connect to a network.

Steps

Select System Sengs → Comm. → ISUP .

DS-K1T321 Series Face Recognion Terminal User Manual

Loading ...

Hikvision DS-K1T321EWX Value Series Face Access Terminal