Loading ...
Loading ...
Loading ...
HD-TVI Speed Dome User Manual
12
DISPLAY SETTINGS
ZOOM SHOW OFF
P T SHOW OFF
TIME SHOW OFF
PRESET SHOW OFF
ZONE SHOW OFF
ADDRESS SHOW OFF
ERROR RATE SHOW OFF
BACK EXIT
Figure 3-6 Display Settings
The speed dome shows the viewing direction when you manually control it to rotate.
Table 1-1 Viewing Direction Display
Display
N
NE
E
SE
S
SW
W
NW
Indication
North
Northeast
East
Southeast
South
Southwest
West
Northwest
The north direction refers to the angle zero.
Heat Parameter Configuration
You can set the HEAT CONTROL to TEMP (controlled by the temperature), ON or OFF.
Fan Parameter Configuration
You can set the FAN CONTROL to TEMP (controlled by the temperature), ON or OFF.
EIS (Electronic Image Stabilization) Configuration
You can set the EIS FUNCTION to ON or OFF.
Preset Focus
You can set the preset focus function ON/OFF on PRESET FOCUS submenu.
Protocol and RS-485 settings
Select the protocol.
Choose the protocol on PROTOCAL submenu. You can configure it as AUTO MATCH, PELCO-P,
PELCO-D, or HIKVISION. When you choose AUTO MATCH, it is protocol self-adaptive.
Set the protocol status.
Set the PROTOCOL STATUS to ON to enable the user-defined protocol.
Enable the RS-485 configuration diagnosis.
You can set 485 CHECK to ON or AUTO for automatic RS-485 configuration diagnosis. If the
configuration is incorrect, an alert will be received; if you set the value as AUTO, it will
automatically stop the diagnosis when no errors exist.
Loading ...
Loading ...
Loading ...