Loading ...
Loading ...
Loading ...
HD-TVI Speed Dome User Manual
4
Chapter 2 Getting Started
2.1 Power-up Action
After the speed dome is power-on, it will perform a series of self-test actions. The interface will be
shown as below:
XXXXX
SN XXXXXXXXX
ADDRESS 0
COM MODE 2400.8.1
PROTOCOL AUTO MATCH
FIRMWARE X.XX
HARDWARE X.XX
BUILD DATE XX XX XX
PAN SUCCESS
TILT SUCCESS
Figure 2-1 Original Interface
Table 2-1 Descriptions of the original interface
SN
The serial No. of the speed dome, which is unique.
ADDRESS
The default communication address of the speed dome.
COM MODE
The communication settings of the speed dome, including baud rate
(2400 by default), data bit (8 by default) and stop bit (1 by default)
digit).
PROTOCOL
It is for the communication with other devices.
FIRMWARE
The version of the firmware.
HARDWARE
The version of the hardware.
BUILD DATE
The date when the program of the software is compiled.
You have to configure the address and the baud rate for the speed dome the same as those in
the control devices.
The speed dome is self-adaptive to the PELCO-D, PELCO-P, and PRIVATE-Code protocols.
2.2 Basic Operations
You can operate the speed dome by using a control device, including the control keyboard, DVR,
DVS, etc. In this manual, accessing the speed dome via the web browser will be taken as the
example.
Loading ...
Loading ...
Loading ...