BAUMR-AG BLWCLSBMRABL3 SYNC Lithium Cordless Leaf Blower User Manual

THE BATTERY MAY HAVE SOME CHARGE ON ARRIVAL, IT IS IMPORTANT

HOWEVER THAT THE BATTERY IS CHARGED PRIOR TO USE.

User Manual

[Revision 6.0 October 2023]

READ THIS MANUAL CAREFULLY BEFORE USE – FAILURE TO DO SO MAY RESULT IN INJURY, PROPERTY DAMAGE AND

MAY VOID WARRANTY. • KEEP THIS MANUAL FOR FUTURE REFERENCE. • Products covered by this manual may vary in

appearance, assembly, inclusions, specifications, description, and packaging.

BL3 Leaf Blower Kit

Safety

Safety messages are designed to alert you to possible dangers or hazards that could cause death, injury or

equipment or property damage if not understood or followed. Safety messages have the following symbols:

You WILL be KILLED or

SERIOUSLY INJURED if you do

not follow instructions.

You CAN be KILLED or

SERIOUSLY INJURED if you do

not follow instructions.

You CAN be INJURED if you do

not follow instructions or equipment

damage may occur.

It is vital that you read and understand this

user manual before using the product,

including safety warnings, and any assembly

and operating instructions. Keep the manual

for future reference.

Safety precautions and recommendations

detailed here must be fully understood and

followed to reduce the risk of injury, fire,

explosion, electrical hazard, and/or property

damage.

Safety information presented here is generic

in nature – some advice may not be

applicable to every product. The term

"equipment" refers to the product, be it

electrical mains powered, battery powered or

combustion engine powered.

• Before Use - If you are not familiar with the

safe operation/handling of the equipment or

are in any way unsure of any aspect of

suitability or correct use for your

application, you should complete training

conducted by a person or organization

qualified in safe use and operation of this

equipment, including fuel/electrical handling

and safety.

• Do NOT operate the equipment in

flammable or explosive environments, such

as in the presence of flammable liquids,

gases or dust. The equipment may create

sparks or heat that may ignite flammable

substances.

• Keep clear of moving parts.

• Equipment may be a potential source of

electric shock or injury if misused.

• Do NOT operate the equipment if it is

damaged, malfunctioning or is in an

excessively worn state.

• Do NOT allow others to use the equipment

unless they have read this manual and are

adequately trained.

• Keep packaging away from children - risk

of suffocation! Operators must use the

equipment correctly. When using the

equipment, consider conditions and pay

due care to persons and property.

General Work Area Safety

• Work areas should be clean and well it.

• Do not operate the equipment if

bystanders, animals etc are within

operating range of the equipment or the

general work area.

• If devices are provided for connecting dust

extraction / collection facilities, ensure

these are connected and used properly.

Dust collection can reduce dust-related

hazards.

General Personal Safety

• Wear appropriate protective equipment

when operating, servicing, or when in the

operating area of the equipment to help

protect from eye and ear injury, poisoning,

burns, cutting and crush injuries. Protective

equipment such as safety goggles,

respirators, non-slip safety footwear, hard

hat, hearing protection etc should be used

for appropriate equipment / conditions.

Other people nearby should also wear

appropriate personal protective equipment.

Do not wear loose clothing or jewellery,

which can be caught in moving parts. Keep

hair and clothing away from the equipment.

• Stay alert and use common sense when

operating the equipment. Do not over-

reach. Always maintain secure footing and

balance.

• Do not use the equipment if tired or under

the influence of drugs, alcohol or

medication.

• This equipment is not intended for use by

persons with reduced physical, sensory or

mental capabilities.

General Fuel Safety

• Petrol/fuel/gasoline is extremely flammable

– keep clear of naked flames or other

ignition sources.

• Do not spill fuel. If you spill fuel, wipe it off

the equipment immediately – if fuel gets on

your clothing, change clothing.

• Do NOT smoke near fuel or when

refuelling.

• Always shut off the engine before

refuelling.

• Do NOT refuel a hot engine.

• Open the fuel cap carefully to allow any

pressure build-up in the tank to release

slowly.

• Always refuel in well ventilated areas.

• Always check for fuel leakage. If fuel

leakage is found, do not start or run the

engine until all leaks are fixed.

General Carbon-Monoxide Safety

• Using a combustion engine indoors CAN

KILL IN MINUTES. Engine exhaust

contains carbon-monoxide – a poison you

cannot smell or see.

• Use combustion engines OUTSIDE only,

and far away from windows, doors and

vents.

General Equipment Use and Care

• The equipment is designed for domestic

use only.

• Handle the equipment safely and carefully.

• Before use, inspect the equipment for

misalignment or binding of moving parts,

loose components, damage or any other

condition that may affect its operation. If

damaged, have the equipment repaired by

an authorised service centre or technician

before use.

• Prevent unintentional starting of the

equipment - ensure equipment and power

switches are in the OFF position before

connecting or moving equipment. Do not

carry equipment with hands or fingers

touching any controls. Remove any tools or

other items that are not a part of the

equipment from it before starting or

switching on.

• Do not force the equipment. Use the

correct equipment for your application.

Equipment will perform better and be safer

when used within its design and usage

parameters.

• Use the equipment and accessories etc. in

accordance with these instructions,

considering working conditions and the

work to be performed. Using the equipment

for operations different from those intended

could result in hazardous situations.

• Always keep equipment components

(engines, hoses, handles, controls, frames,

housings, guards etc) and accessories

(cutting tools, nozzles, bits etc) properly

maintained. Keep the equipment clean and,

where applicable, properly lubricated.

• Store the equipment out of reach of

children or untrained persons. To avoid

burns or fire hazards, let the equipment

cool completely before transporting or

storing. Never place or store the equipment

near flammable materials, combustible

gases or liquids etc.

• The equipment is not weather-proof, and

should not be stored in direct sunlight, at

high ambient temperatures or locations that

are damp or humid.

• Do not clean equipment with solvents,

flammable liquids or harsh abrasives.

• For specific equipment safety use and care,

see Equipment Safety.

BL3 Leaf Blower Kit

General Electrical Safety

• Inspect electrical equipment, extension

cords, power bars, and electrical fittings for

damage or wear before each use. Repair or

replace damaged equipment immediately.

• Ensure all power sources conform to

equipment voltage requirements and are

disconnected before connecting or

disconnecting equipment.

• When wiring electrically powered

equipment, follow all electrical and safety

codes.

• Wherever possible, use a residual current

device (RCD).

• High voltage / high current power lines may

be present. Use extreme caution to avoid

contact or interference with power lines.

Electrical shock can be fatal.

General Electrical Safety

• Electrically grounded equipment must have

an approved cord and plug and be

connected to a grounded electrical outlet.

• Do NOT bypass the ON/OFF switch and

operate equipment by connecting and

disconnecting the electrical cord.

• Do NOT use equipment that has exposed

wiring, damaged switches, covers or

guards.

• Do NOT use electrical equipment in wet

conditions or in damp locations.

• Do NOT use electrical cords to lift, move or

carry equipment.

• Do NOT coil or knot electrical cords, and

ensure electrical cords are not trip hazards.

General Service Information

• The equipment must be serviced or

repaired at authorised service centres by

qualified personnel only.

• Replacement parts must be original

equipment manufacturer (OEM) to ensure

equipment safety is maintained.

• Do NOT attempt any maintenance or repair

work not described in this manual.

• After use, the equipment and components

may still be hot – allow the equipment to

cool and disconnect spark plugs and/or

electrical power sources and/or batteries

from it before adjusting, changing

accessories or performing repair or

maintenance.

• Do NOT adjust while the equipment is

running.

• Perform service related activities in suitable

conditions, such as a workshop.

• Replace worn, damaged or missing

warning/safety labels immediately.

Work Area Safety

• Keep work area clean and well lit. Cluttered or dark areas invite accidents.

• Do not operate power tools in explosive atmospheres, such as in the presence of flammable liquids, gases or dust. Power tools create sparks

which may ignite the dust or fumes.

• Keep children and bystanders away while operating a power tool. Distractions can cause you to lose control.

Electrical Safety

• Power tool plugs must match the outlet. Never modify the plug in any way. Do not use any adapter plugs with earthed (grounded) power tools.

Unmodified plugs and matching outlets will reduce risk of electric shock.

• Avoid body contact with earthed or grounded surfaces, such as pipes, radiators, ranges and refrigerators. There is an increased risk of electric

shock if your body is earthed or grounded.

• Do not expose power tools to rain or wet conditions. Water entering a power tool will increase the risk of electric shock.

• Do not abuse the cord. Never use the cord for carrying, pulling or unplugging the power tool. Keep cord away from heat, oil, sharp edges or

moving parts. Damaged or entangled cords increase the risk of electric shock.

• When operating a power tool outdoors, use an extension cord suitable for outdoor use. Use of a cord suitable for outdoor use reduces the risk of

electric shock.

Personal Safety

• Stay alert, watch what you are doing and use common sense when operating a power tool. Do not use a power tool while you are tired or under

the influence of drugs, alcohol, or medication. A moment of inattention while operating power tools may result in serious personal injury.

• Use personal protective equipment. Always wear eye protection. Protective equipment such as dust mask, non-skid safety shoes, hard hat, or

hearing protection used for appropriate conditions will reduce personal injuries.

• Prevent unintentional starting. Ensure the switch is in the off position before connecting to power source and/or battery pack, picking up or

carrying the tool. Carrying power tools with your finger on the switch or energising power tools that have the switch on invites accidents.

• Remove any adjusting key or wrench before turning the power tool on. A wrench or a key left attached to a rotating part of the power tool may

result in personal injury.

• Do not overreach. Keep proper footing and balance at all times. This enables better control of the power tool in unexpected situations.

• Dress properly. Do not wear loose clothing or jewellery. Keep your hair, clothing and gloves away from moving parts. Loose clothes, jewellery or

long hair can be caught in moving parts.

• If devices are provided for the connection of dust extraction and collection facilities, ensure these are connected and properly used. Use of dust

collection can reduce dust-related hazards.

Power Tool Use and Care

• Do not force the power tool. Use the correct power tool for your application. The correct power tool will do the job better and safer at the rate for

which it was designed.

• Do not use the power tool if the switch does not turn it on and off. Any power tool that cannot be controlled with the switch is dangerous and must

be repaired.

• Disconnect the plug from the power source and/or the battery pack from the power tool before making any adjustments, changing accessories, or

storing power tools. Such preventive safety measures reduce the risk of starting the power tool accidentally.

• Store idle power tools out of the reach of children and do not allow persons unfamiliar with the power tool or these instructions to operate the

power tool. Power tools are dangerous in the hands of untrained users.

• Maintain power tools. Check for misalignment or binding of moving parts, breakage of parts and any other condition that may affect the power

tool's operation. If damaged, have the power tool repaired before use. Many accidents are caused by poorly maintained power tools.

BL3 Leaf Blower Kit

• Keep cutting tools sharp and clean. Properly maintained cutting tools with sharp cutting edges are less likely to bind and are easier to control.

• Use the power tool, and accessories in accordance with these instructions, taking into account the working conditions and the work to be

performed. Use of the power tool for operations different from those intended could result in a hazardous situation.

• This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience

and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.

• Children should be supervised to ensure that they do not play with the appliance.

Battery Tool Use and Care

• Ensure the switch is in the off position before inserting battery pack. Inserting the battery pack into power tools that have the switch on invites

accidents.

• Recharge only with the charger specified by the manufacturer. A charger that is suitable for one type of battery pack may create a risk of fire

when used with another battery pack.

• Use power tools only with specifically designated battery packs. Use of any other battery packs may create a risk of injury and fire.

• When battery pack is not in use, keep it away from other metal objects like paper clips, coins, keys, nails, screws, or other small metal objects

that can make a connection from one terminal to another. Shorting the battery terminals together may cause burns or a fire.

• Under abusive conditions, liquid may be ejected from the battery; avoid contact. If contact accidentally occurs, flush with water. If liquid contacts

eyes, additionally seek medical help. Liquid ejected from the battery may cause irritation or burns.

Service

• Have your power tool serviced by a qualified repair person using only identical replacement parts. This will ensure that the safety of the power

tool is maintained.

Additional Safety Instructions

• Wear ear protectors. Exposure to noise can cause hearing loss. Loss of control can cause personal injury.

• If possible, always use clamps or a vice to hold your work piece.

• Always switch off before you put the tool down.

• Ensure that the lighting is adequate.

• Do not put pressure on the tool, such that it slows the motor down.

• Keep the area free of tripping hazards.

• Do not let anyone under 18 years operate this tool.

• Only use accessories in good condition.

• Do not touch the blade after operation. It will be very hot.

• Keep your hands away from under the workpiece.

• Never use your hands to remove sawdust, chips, or waste close by the blade.

• Rags, cloths, cord, string, and the like should never be left around the work area.

• Support the work properly.

• If you are interrupted when operating the tool, complete the process and switch off before looking up.

• Periodically check that all nuts, bolts and other fixings are properly tightened.

• When using the tool, use safety equipment including safety glasses or shield, ear defenders, and protective clothing including safety gloves.

• Wear a dust mask if the cutting or sanding operation creates dust.

• If in doubt, do not plug in the tool. Using a power source with a voltage less than the nameplate rating is harmful to the motor.

• The tool must be used only for its prescribed purpose. Any use other than those mentioned in this Manual will be considered a case of misuse.

The user and not the manufacturer shall be liable for any damage or injury resulting from such cases of misuse.

• To use this tool properly, you must observe the safety regulations, the assembly instructions and the operating instructions to be found in this

Manual. All persons who use and service the machine have to be acquainted with this Manual and must be informed about its potential hazards.

• Children and frail people must not use this tool. Children should be supervised at all times if they are in the area in which the tool is being used. It

is also imperative that you observe the accident prevention regulations in force in your area. The same applies for general rules of occupational

health and safety.

• The manufacturer shall not be liable for any changes made to the tool nor for any damage resulting from such changes. Even when the tool is

used as prescribed it is not possible to eliminate all residual risk factors. The following hazards may arise in connection with the tool's

construction and design:

• Damage to the lungs if an effective dust mask is not worn.

• Damage to hearing if effective ear defenders are not worn.

Additional Safety Instructions for the Charger

• Your tool with Lithium Ion batteries may only be charged with the specific designed Lithium Ion battery charger purchased with the tool. IT IS

DANGEROUS TO USE ANY OTHER BATTERY CHARGER TO CHARGE YOUR TOOL. Do not attempt to charge the battery pack with any

other charger than the one supplied.

• Before using the charger, read all the instructions, labels and cautionary markings on the charger and battery pack as well as the instructions on

using the battery pack.

• Do not use the charger if it has been subjected to a heavy knock, dropped or otherwise damaged in anyway. Take the charger to an authorised

service centre for a check or repair.

• Do not disassemble the charger. Opening or removing covers may expose you to dangerous voltages or other risks. Incorrect reassembly can

cause electric shock when you use the tool or charger again. Take the charger to a power tool repair centre when service or repair is required.

BL3 Leaf Blower Kit

Incorrect re-assembly may result in the risk of fire, electric shock, or electrocution. To reduce the risk of electric shock, do not disassemble any

part of the product.

• DANGER. If the battery pack is cracked or damaged in any other way, do not insert it in the charger.

• Do not plug anything other than your tool into the charger, as other objects may touch dangerous voltage points or short out parts, which could

result in fire or electric shock.

• Do not place the tool or charger on an uneven surface, as a fall may cause serious damage.

• Never place the tool or charger near or over a heat source such as a radiator or heater.

• Do not operate the charger in a cabinet or other enclosure unless proper ventilation is provided.

• Use the battery charger indoors only.

• WARNING. Do not allow any liquid to come into contact with the charger. There is a danger of electric shock. Do not position the tool

or battery charger near water; for example, near a sink, wash bowl or toilet. Do not spill liquid of any kind on the tool or charger. Doing

so may short out parts, Causing damage to the product and creating the risk of fire or electric shock.

• To reduce the risk of an electric shock, unplug the charger from the power supply before attempting to clean it. To clean tool or charger, wipe with

a damp cloth. Use of any other cleaners is not recommended.

• Do not place any object on to, or allow anything to rest on the charger.

• Make sure that the charger cable is positioned where it will not be stepped on, tripped over or otherwise subjected to damage or stress. Keep the

lead away from operating machinery.

• Do not pull on the lead of the charger to disconnect it from the mains power socket.

• Do not use an extension cord unless it is absolutely necessary. The use of an improper extension cord could cause the risk of fire, electric shock

or electrocution.

• Never attempt to connect two chargers together.

• Do not charge batteries or use the tool and battery pack in locations where the temperature may be below 40°F or exceed 1 04 °F such as

alongside sheds or metal structures.

• The battery can be charged or operated at temperatures between 40° F and 104 ° F.

• Never charge you lithium ion battery below or above temperatures recommended otherwise fire or serious damage to the battery pack

may occur.

• The most suitable temperatures to charge the battery pack are between 68° F -77° F.

• Caution. If you wish to charge a second battery pack, unplug the charger from the mains supply and leave it for at least 10 minutes.

After this time you can charge a second battery pack.

Additional Safety Instructions Related to the Battery Pack and Battery Safety

• Use only the batteries supplied with the Tool or manufacturer-approved replacements.

• Do not use the battery to power any device other than the tool it was sold with.

• Charge the battery only with the WORKPRO charger supplied with the tool or WORKPRO-approved replacements and according to the

instructions in the WORKPRO Instruction Manual.

• Do not charge the battery in a place where static electricity is generated nor let the battery touch something that is statically charged.

• The battery can be stored at temperatures between 40°F and 104°F.

• Never store or leave your lithium ion battery in temperatures over that recommended otherwise fire may occur.

• Do NOT store the Lithium Ion battery anywhere that the temperature can easily reach higher temperatures than recommended -this includes

garden type sheds, and Vehicles where the inside temperature can climb to dangerous levels in the direct sunlight and on high temperature days.

THINK BEFORE LEAVING YOUR LITHIUM ION BATTERY PACK IN STORAGE.

• The battery can be charged or operated at temperatures between 40°F and 104°F.

• NEVER CHARGE YOUR LITHIUM ION BATTERY BELOW OR ABOVE TEMPERATURES RECOMMENDED OTHERWISE FIRE OR

SERIOUS DAMAGE TO THE BATTERY PACK MAY OCCUR.

• The most suitable temperatures to charge the battery pack are between 68 -77°F.

• Always allow the battery pack to cool down after charging, do not place it in a hot environment such as a metal shed or open trailer left in the sun.

• Take care where the tool is stored. Do not store in areas of corrosive fumes, or salt air or similar conditions. Try and store the tool in the

packaging supplied with the tool.

• Do not dispose of the battery in a fire or put the battery into a microwave oven, conventional oven, dryer, or high-pressure container. Under these

conditions, the battery may explode.

• Never attempt to open the battery pack, puncture the battery or subject the battery to strong physical shock.

• If the plastic housing of the battery pack breaks open or cracks, immediately discontinue its use and do not recharge it. Ensure the battery pack

clip is in good condition and will not allow the pack to fall free from the tool. If the clip is damaged or for any reason is not locking the pack in

place Do Not continue to use.

• Stop using the battery if it exhibits abnormal heat, odour, colour, deformation, or is in an abnormal condition.

• If you detect leakage or a foul odour, it is especially important to keep the battery away from fire. If battery liquid leaks onto your skin or clothes,

wash well with clean water immediately. If liquid leaking from the battery gets into your eyes, do not rub your eyes. Rinse your eyes well (for at

least 10 minutes) with clean water, and consult a doctor immediately. Do not use a leaking battery.

• Handle batteries with care to avoid shorting the battery with conducting materials, such as nails, screws, metal watch bands, rings, bracelets, and

keys. The battery may overheat and could burn you.

• After the battery has reached the end of its useful life, we recommend recycling the materials at your local municipal council recycling centre. DO

NOT attempt to replace the battery cells in the battery pack, repair or modify any part of the battery pack assembly.

• When recycling, make it nonconductive by applying insulating tape to the terminals located on the battery.

BL3 Leaf Blower Kit

When To Charge the Battery

• New batteries are shipped in a low charged condition and should be fully charged before Use. The battery pack can be recharged at any time

during use, provided the pack is not overheated.

• If the battery pack starts to cut out due to low voltage, or previous tasks undertaken can no longer be performed, it is suggested to stop using the

tool and recharge the battery.

• For storage, it is suggested to recharge the battery between 50% and 75% charge.

Leaf Blower Safety Warnings

• When working with the device, always maintain a safe distance and natural body position.

• Always hold the device firmly in hand.

• Before starting to work, check the working area for animals and objects. Remove all objects that may be slung away or become jammed in the

cutting tool.

• No other persons or animals may be present within an area of 5 m around the working area, as they may otherwise by injured by objects being

slung away.

• Only work in good light and vision conditions.

• Do not work above head height! Do not lean forward or back!

• The operator must wear tightly-fit clothing. Avoid wearing loose clothing. Wear sturdy shoes and long trousers.

• Take care when walking backwards. Danger of stumbling!

• Never work in the rain.

• Do not blow heavy materials such as metal, stones, branches, fir cones or broken glasses.

• When working with the device, ensure that there is sufficient lighting.

• Always wear the required personal protective equipment.

• Be careful of the dust you have raised and flying objects. Especially dangerous is the rebound effect on walls or walls of houses.

• Do not direct the device at people or animals when blowing.

• Before starting to blow, loosen foreign bodies with a rake or broom.

• The machine may only be operated during sensible hours - not too early in the morning or too late in the evening, as it may disturb other people.

• The times listed by the local authorities must be adhered to.

• The whole blower nozzle piece must be used so that the airstream can work close to the ground.

• Heed children, pets, open windows, and blow the foreign bodies safely away.

• DANGER OF INJURY! Beware of hurled-away objects. Keep bystanders away. KEEP OTHER PERSONS IN DISTANCE.

• WARNING: When operating the device, take care that no other persons are nearby (safe distance: 5m). This is particularly valid for

children and animals.

BL3 Leaf Blower Kit

Safety Symbols

The product may have safety warning labels attached to it, explained below. Understand the symbols on your

product and their meanings. If any stickers become unreadable, unattached etc., replace them.

Flammable Material Hazard

Flammable liquids, gases or

substances etc may present.

Avoid ignition sources and open

flames. Danger of fire.

Read User Manual

Read and fully understand

product safety warnings,

operation, procedures etc before

using the product.

Use Hand Protection

Wear appropriate hand protection

and take due care as the product

or use of the product may present

hand hazards.

Carbon-Monoxide Hazard

Do not use the product in

confined areas or without

adequate ventilation. Carbon-

monoxide poisoning can be fatal.

Electrocution / Electrical Shock

Hazard

High voltage or high current

electricity may be present or

required by the product. Take

due care when handling electrical

products, cables, plugs and

leads. Electrical shock can be

fatal.

Toxic Fumes / Dust Hazard

Using the product or by-products

from use may produce fumes,

smoke or particles that could be

harmful if inhaled. Wear

appropriate breathing protection

and have adequate ventilation.

Explosive Material Hazard

Combustible liquids, gases or

substances etc may be present.

Avoid ignition sources and open

flames. Danger of explosion.

Cutting / Amputation Hazard

The product may have blades,

edges or mechanical devices that

can cause severe cut injury to

fingers, limbs etc. Take due care

when handling and using the

product.

Crush Hazard

The product may have blades,

edges or mechanical devices that

can cause severe crush injury to

fingers, limbs etc. Take due care

when handling and using the

product.

Single Operator Only

The product must be operated by

a single person only. More than

one person operating the product

may introduce additional hazards.

Use Face Protection

Wear appropriate full-face

protection and take due care as

the product or use of the product

may present face and eye

hazards.

Use Foot Protection

Wear appropriate foot protection

and take due care as the product

or use of the product may present

foot hazards.

Use Eye / Ear / Head Protection

Wear appropriate eye and / or

ear and / or head protection and

take due care as the product or

use of the product may present

eye, hearing and head hazards.

Running Hazard

Do not run on or near the product

as doing so may present a fall

hazard.

Diving Hazard

Do not dive into the product as

doing so may present a neck /

head injury hazard.

Adult Supervision Required

Always supervise children and

other users of a product to

prevent drowning or injury.

Skin Penetration / Puncture

Hazard

The product may produce

pressure, emit liquids or objects

that can cause severe injury to

fingers, limbs, blood etc. Take

due care when handling and

using the product.

Hot Surface Hazard

Be aware that the product may

produce high temperatures and

hot surfaces that can cause burn

injuries.

Flying Debris Hazard

Be aware that the product or use

of the product may present

hazards produced by flying

debris. Wear appropriate clothing

and protective devices.

Moving Parts Hazard

Be aware that the product

contains or uses mechanical

devices that move or rotate.

Always wait for moving parts to

stop fully before handling the

product, adjusting, maintenance

etc.

BL3 Leaf Blower Kit

Carbon-Monoxide Hazard

Do not use the product in

confined areas or without

adequate ventilation. Carbon-

monoxide poisoning can be fatal.

Pull Hazard

Be aware that the product

contains or uses mechanical

devices that can pull in objects

and can cause severe injury to

fingers, limbs etc. Take due care

when handling and using the

product.

Slope / Fall Injury Hazard

Be aware that using the product

on sloping surfaces or in slippery

conditions may present additional

dangers from falls and contact

with blades, moving parts, hot

surfaces etc.

"Slam Dunk" Warning

Do NOT attempt "slam dunk"

manoeuvres as this may result in

severe injury due to falling,

product breakage or collapse etc.

Electrocution / Electrical Shock

Hazard - Outdoor

High voltage or high current

electricity may be present or

required by the product. Do NOT

use in rain, damp or wet

conditions. Electrical shock can

be fatal.

Electrocution / Electrical Shock

Hazard - Disconnect

High voltage or high current

electricity may be present or

required by the product. Always

disconnect the product from the

electrical supply before handling

the product, adjusting,

maintenance etc.

Power Line Electrocution

Hazard

High voltage / high current power

lines may be present. Use

extreme caution to avoid contact

or interference with power lines.

Electrical shock can be fatal.

"Kick-Back" Hazard

High level of "kick-back" hazard

that can cause the machine to

suddenly rotate towards operator.

Kick-back injury can be fatal.

Winch Operator Position

Hazard

Do NOT stand between winch

and load. Do NOT use winch to

move people.

Winch Lift Hazard

Do NOT LIFT load vertically. Use

machine to PULL only.

Cable Hazard

Ensure that load bearing cable is

not kinked or knotted.

Winch Cable Hazard

Ensure that there is a minimum

number of cable coils on

winching mechanism.

Winch Hook Hazard

Carry hook to load – do NOT

throw or run.

Flash / Blinding Hazard

Wear appropriate eye protection

for welding. Direct exposure to

weld arcs may cause permanent

eye injury.

Laser Hazard

Laser may be in use – do NOT

look directly at laser or allow

others to.

BL3 Leaf Blower Kit

Table of Contents

Safety ............................................................................................................................................................. 2

Safety Symbols ........................................................................................................................................................... 7

Parts Identification ..................................................................................................................................... 10

Operation ..................................................................................................................................................... 11

Charging the Battery Pack ........................................................................................................................................ 11

Checking the Remaining Capacity of the Battery ..................................................................................................... 12

Checks Before Use ................................................................................................................................................... 13

Connecting the Blower Tube to the Air Inlet ............................................................................................................. 13

Switching ON/OFF .................................................................................................................................................... 14

Proper Position ......................................................................................................................................................... 14

Lithium Battery Care and Maintenance .................................................................................................... 15

Top 3 Battery Care Requirements ............................................................................................................................ 15

Maintenance, Storage, and Transport ...................................................................................................... 17

Maintenance ............................................................................................................................................................. 17

Storage ..................................................................................................................................................................... 17

Transport .................................................................................................................................................................. 17

Troubleshooting ......................................................................................................................................... 17

Charger Indicators ...................................................................................................................................... 18

Specifications ............................................................................................................................................. 19

BL3 Leaf Blower Kit

Parts Identification

Spare parts available

for purchase, scan QR

code below:

BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG

BL3 Leaf Blower Kit

No. Name No. Name

1 Handle 7 Battery pack

2 Variable speed dial 8 Display for remaining capacity

3 Blower tube release button 9 Push button for capacity display

4

Blower tube

10

Battery pack release button

5

Hang hole

11

Control lights

6

Scraper

12

Battery charger

Operation

Charging the Battery Pack

CAUTION! Risk of injury! Comply with all safety instructions when handling rechargeable

devices.

NOTICE! Risk of damage to the unit! Do not allow the battery pack to deep discharge.

NOTICE! Risk of damage to the unit! Do not press the On/Off switch after the device has deactivated

automatically.

Note: The Li-Ion battery pack can be charged at any time without affecting the lifetime of the unit. Interrupting

the charging process will not damage the battery pack.

Note: If the battery is fully loaded, the charger automatically switches over to the maintenance charge function.

The battery can thus remain in the charger permanently.

Note: The battery pack must be charged prior to the first start-up. (charging time: around 60 minutes)

1. Press in the locking button (10) and remove the battery from the device (See Fig. A&B).

BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG

BL3 Leaf Blower Kit

2. Insert the battery pack into the charger (See Fig. C).

3. Plug the charger into the power supply. The charging status is displayed by the control lights (11) (for more

information, please see the Charger Indicator s

ection).

4. Slot the battery pack into the device and make sure it clicks into place correctly (See Fig. D & E).

Checking the Remaining Capacity of the Battery

1. Press the battery capacity indicator switch button (9).

2. The remaining capacity of the battery is displayed by the 4 LED control lights (8).

− All 4 LEDs are lit: The battery is fully charged.

− 3, 2, or 1 LED (s) are lit: The battery has an adequate remaining charge.

− 1 LED and blinking: The battery is empty, recharge the battery.

BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG

BL3 Leaf Blower Kit

− All LEDs blink: The battery pack is too hot (e.g. due to direct sunlight or prolonged use) or too cold

(below 0°C). Do not use or charge the battery pack. make sure the battery temperature is between 4°C

and 40°C.

Checks Before Use

DANGER! Risk of injury! The device must only be put into operation if no faults are found. If any

part of the device is defective, it must be replaced before the next use.

WARNING! Risk of injury! Before starting work, check the area and remove all objects which may be kicked up

by the unit.

Check the safety equipment and the safe condition of the device.

•

Check all parts to make sure they fit tightly.

•

Check whether there are visible defects: broken parts, cracks, etc.

Connecting the Blower Tube to the Air Inlet

Line up the slot (A) on the inside of the blower tube (4) with the tap (B) of the housing opening, as shown in the

below picture. Make sure the installation is firm and secure (See Fig. F).

BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG

BL3 Leaf Blower Kit

Switching ON/OFF

1. To switch the machine ON, turn the variable speed dial (2) to [1/2/3/4/MAX] to turn on and to increase the air

speed (See Fig. G)

2. To switch the machine OFF, turn the variable speed dial to [0].

Proper Position

Hold the unit and your dominant hand at approximately hip level on the operating handle, balanced in a

comfortable way.

NOTE: Leaf blowers/vacuums should not be performed during normal, quiet hours.

BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG

BL3 Leaf Blower Kit

Lithium Battery Care and Maintenance

Top 3 Battery Care Requirements

1. Charge battery before first use. The battery may arrive with some charge, regardless of this the

battery must be charged for one hour on the initial charge and one hour for each subsequent charge.

2. Charge battery immediately when it is depleted. Do not store a depleted battery. This will

permanently impact the life of the battery. If the battery is going to be stored for a period of time, fully

charge the battery before storing.

3. Disconnect battery when not in use. To prolong the life of a battery, disconnect it from the unit

when not in use. Disconnect chargers from the battery once charged.

To ensure the battery maintains optimum performance, follow the guidelines outlined below.

•

For best results, charge batteries in temperatures between 10°C and 30°C

•

When battery is charged, disconnect the charger from the power supply and remove the battery from the

charger.

•

If a battery is stored or otherwise unused for an extended period, and the battery has no charge remaining

when you check it, consider it to be damaged. Do not attempt to recharge it or to use it. Replace it with a

new battery.

•

Use only with the battery charger specified by the manufacturer.

•

Ensure that the battery charger electrical cord is not subjected to damage or stress. Do not operate the

battery charger if it has a damaged electrical cord or plug.

•

Do not use the charger in wet areas or expose it to rain or water.

•

The typical estimated life of a Lithium-Ion battery is about two to three years or 300 to 500 charge cycles,

whichever occurs first. One charge cycle is a period of use from fully charged, to fully discharged, and fully

recharged again

•

Explosion hazard – protect the battery against heat; for example, direct sunlight and fire. Do not store

batteries in vehicles or locations subject to heat.

•

Batteries can explode in the presence of an ignition source, such as a pilot light. To reduce the risk of

serious personal injury, never use any cordless product in the presence of open ﬂame. Exploding batteries

can propel debris and chemicals.

•

Do not open the battery – danger of short-circuiting and/or explosion.

•

Do not attempt to destroy or disassemble the battery pack or remove any of its components.

•

Do not touch the battery terminals with metal objects and/or body parts as short-circuit and/or personal injury

may result.

•

Explosion hazard – do not open and/or short-circuit the battery.

•

Poison hazard – battery leakage (liquid ejection). Under extreme conditions, liquid may be ejected from the

battery – avoid contact. If contact accidentally occurs, immediately seek medical attention, and flush with

water. If liquid contacts eyes, immediately seek medical attention, flush with clean water for at least 10

minutes. Liquid ejected from the battery may cause irritation or burns.

•

Dispose of non-serviceable batteries in an environmentally responsible manner and according to local

regulations.

Failure to adhere to the requirements above may result in the battery becoming inoperative or battery life being

reduced. In extreme cases or abuse, battery overheating or fire may result.

BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG

BL3 Leaf Blower Kit

BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG

BL3 Leaf Blower Kit

Maintenance, Storage, and Transport

Maintenance

DANGER! Risk of injury! Before any maintenance or cleaning work:  Remove the battery.  Let

the device cool down.

Dismantling the Device

Press the release button (3) and remove the blower tube (4) from the device.

Cleaning the Machine

1. Remove any coarse dirt.

2. Wipe the appliance with a slightly damp cloth.

Storage

DANGER! Danger of Injury! Make sure no unauthorised persons can gain access to the

appliance!

Store the appliance where it is dry and well ventilated.

Transport

1. Secure the appliance against slipping.

2. If shipping, use the original packaging wherever possible.

Troubleshooting

DANGER! Risk of injury! Unprofessional repairs may mean that your unit will no longer operate

safely. This endangers you and your environment.

Malfunctions are often caused by minor faults. You can easily remedy most of these yourself. Please consult the

following table before contacting a qualified technician or an authorised service centre.

Error/Fault Cause Remedy

Unit does not work.

Battery not inserted correctly.

Adjust and ensure the battery is

inserted correctly.

Battery pack discharged. Charge the battery pack.

Battery pack defective.

Contact a qualified technician or an

authorised service centre.

Unit is defective.

Contact a qualified technician or an

authorised service centre.

NOTE: If you cannot fix the fault yourself, contact a qualified technician or an authorised service centre. Please

be aware that any improper repairs will also invalidate the warranty and additional costs may be incurred.

BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG

BL3 Leaf Blower Kit

Charger Indicators

Indicator Status

Explanations and Actions

Red LED

Green

LED

ON OFF

Ready for use

T

he charger is connected to the mains power and is ready for use; there is no battery pack

in the charger.

OFF

Quick

Flashing

(2Hz)

Low-cu

rrent safety charging

As the battery pack voltage is under 15V, the charger is in low-current charging mode. The

charging current is below 0.5A. This can maximum the life of the battery.

OFF

Slow

Flashing

(1Hz)

High-c

urrent charging

As the battery pack voltage is above 15V, the charger is in quick charge mode, the

charging current is at 2.3-2.4A.

Important! The actual charging times may vary slightly from the stated charging times

depending on the existing battery charge.

OFF ON

The battery is c

harged and ready to use.

The battery is fully charged and ready to use.

Action: Take the battery pack out of the charger. Disconnect the charger from the mains

supply.

Quick

Flashing

(2Hz)

OFF

Fault

C

harging is no longer possible. The battery pack maybe defective.

Action: Never charge a defective battery pack. Take the battery pack out of the charger.

Slow

Flashing

(1Hz)

OFF

Temperature fault

T

he battery pack is too hot (e.g. due to direct sunshine/prolonged use) or too cold (below

40° F).

Action: Remove the battery pack and keep it at room temperature (approx. 68° F) for 3

Hours.

BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG

BL3 Leaf Blower Kit

Specifications

Power source Battery, cordless

Type Handheld Leaf Blower

Power 20V

Max air speed 80MPH (130km/h)

Air volume 310CFM (570m3/h)

Number of speed level 5 speeds

Handling Soft Grip

Battery type Lithium battery

Battery 20V 2.0 Ah (Chinese cell): 18650

Battery life cycle (times) More than 300 cycles of normal charge and discharge

Charger 240V

Plug SAA

Running time MAX high speed 6min, low speed 10min

Charging time 60min.

Noise level 92, 30 dB(A)

Nozzle size Air duct area: 4418mm

2

(air outlet d=75mm)

Vacuum function No

BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG

Some experts believe that the incorrect or prolonged use of almost any

product may cause serious injury or death. To help reduce your risk of

serious injury or death, refer to the information below. For more information,

see www.datastreamserver.com/safety



Consult all documentation, packaging

and product labelling before use. Note

that some products feature

documentation available online. It is

recommended to print and retain the

documentation.



Before each use, check the product for

loose/broken/damaged/missing parts,

wear or leaks (if applicable). Never use a

product with

loose/broken/damaged/missing parts,

wear or leaks.



Products must be inspected and serviced

(if applicable) by a qualified technician

every 6 months. This is based on

average residential use by persons of

average size and strength, and on a

property of average metropolitan size.

Use beyond these recommendations may

require more frequent

inspections/servicing.



Ensure that all users of the product have

completed a suitable industry recognised

training course before being allowed

access to the product.



The product has been supplied by a general merchandise

retailer that may not be familiar with your specific

application or description of application. Be sure to attain

third-party approval from a qualified specialist for your

application before use, regardless of any assurances from

the retailer or its representatives.



This product is not intended for use where fail-safe

operation is required. As with any product (for example,

automobile, computer, toaster), there is the possibility of

technical issues that may require the repair or

replacement of parts, or the product itself. If the possibility

of such failure and the associated time it may take to

rectify could in any way inconvenience the user, business

or employee, or financially affect the user, business or

employee, then the product is not suitable for your

requirements. This product is not intended for use where

incorrect operation or a failure of any kind, including but

not limited to, a condition requiring product return,

replacement, parts replacement or service by a technician

may cause financial loss, loss of employee time or an

inconvenience requiring compensation.



If this product has been purchased in error when

considering the information presented here, contact the

retailer directly for details of their returns policy, if

required.

ideas, diagrams or images may be reproduced or transmitted in any form or by any means, electronic or

mechanical, including photocopying, scanning or recording, or any information storage and retrieval system,

without express permission or consent from the publisher.

BAUMR-AG BLWCLSBMRABL3 SYNC Lithium Cordless Leaf Blower Electric Hand-held Garden Tool 20V

Product's Documents

Product manual

Specifications

BAUMR-AG BLWCLSBMRABL3 Questions and Answers