Powerblade BW4 20V Cordless Leaf Blower Kit Battery User Manual

BW4 Leaf Blower Kit

User Manual

[Revision 1.0]

READ THIS MANUAL CAREFULLY BEFORE USE – FAILURE TO DO SO MAY RESULT IN INJURY, PROPERTY DAMAGE AND

MAY VOID WARRANTY. • KEEP THIS MANUAL FOR FUTURE REFERENCE. • Products covered by this manual may vary in

appearance, assembly, inclusions, specifications, description, and packaging.

THE BATTERY MAY HAVE SO

ME CHARGE ON ARRIVAL, IT IS IMPORTANT

HOWEVER THAT THE BATTERY IS CHARGED PRIOR TO USE.

NOTE: Battery and charger

may not be included with your

purchase. Please refer to your

product’s online listing to

know what is included.

BW4 Leaf Blower Kit

E&OE © PowerBlade 2

Safety

Safety messages are designed to alert you to possible dangers or hazards that could cause death, injury or

equipment or property damage if not understood or followed. Safety messages have the following symbols:

You WILL be KILLED or

SERIOUSLY INJURED if you do

not follow instructions.

You CAN be KILLED or

SERIOUSLY INJURED if you do

not follow instructions.

You CAN be INJURED if you do

not follow instructions or equipment

damage may occur.

It is vital that you read and understand this

user manual before using the product,

including safety warnings, and any assembly

and operating instructions. Keep the manual

for future reference.

Safety precautions and recommendations

detailed here must be fully understood and

followed to reduce the risk of injury, fire,

explosion, electrical hazard, and/or property

damage.

Safety information presented here is generic

in nature – some advice may not be

applicable to every product. The term

"equipment" refers to the product, be it

electrical mains powered, battery powered or

combustion engine powered.

• Before Use - If you are not familiar with the

safe operation/handling of the equipment or

are in any way unsure of any aspect of

suitability or correct use for your

application, you should complete training

conducted by a person or organization

qualified in safe use and operation of this

equipment, including fuel/electrical handling

and safety.

• Do NOT operate the equipment in

flammable or explosive environments, such

as in the presence of flammable liquids,

gases, or dust. The equipment may create

sparks or heat that may ignite flammable

substances.

• Keep clear of moving parts.

• Equipment may be a potential source of

electric shock or injury if misused.

• Do NOT operate the equipment if it is

damaged, malfunctioning or is in an

excessively worn state.

• Do NOT allow others to use the equipment

unless they have read this manual and are

adequately trained.

• Keep packaging away from children - risk

of suffocation! Operators must use the

equipment correctly. When using the

equipment, consider conditions and pay

due care to persons and property.

General Work Area Safety

• Wor

k areas should be clean and well it.

• Do not operate the equipment if

bystanders, animals etc are within

operating range of the equipment or the

general work area.

• If devices are provided for connecting dust

extraction / collection facilities, ensure

these are connected and used properly.

Dust collection can reduce dust-related

hazards.

General Personal Safety

• Wear

appropriate protective equipment

when operating, servicing, or when in the

operating area of the equipment to help

protect from eye and ear injury, poisoning,

burns, cutting and crush injuries. Protective

equipment such as safety goggles,

respirators, non-slip safety footwear, hard

hat, hearing protection etc should be used

for appropriate equipment / conditions.

Other people nearby should also wear

appropriate personal protective equipment.

Do not wear loose clothing or jewellery,

which can be caught in moving parts. Keep

hair and clothing away from the equipment.

• Stay alert and use common sense when

operating the equipment. Do not over-

reach. Always maintain secure footing and

balance.

• Do not use the equipment if tired or under

the influence of drugs, alcohol, or

medication.

• This equipment is not intended for use by

persons with reduced physical, sensory, or

mental capabilities.

General Fuel Safety

• P

etrol/fuel/gasoline is extremely flammable

– keep clear of naked flames or other

ignition sources.

• Do not spill fuel. If you spill fuel, wipe it off

the equipment immediately – if fuel gets on

your clothing, change clothing.

• Do NOT smoke near fuel or when

refuelling.

• Always shut off the engine before

refuelling.

• Do NOT refuel a hot engine.

• Open the fuel cap carefully to allow any

pressure build-up in the tank to release

slowly.

• Always refuel in well-ventilated areas.

• Always check for fuel leakage. If fuel

leakage is found, do not start, or run the

engine until all leaks are fixed.

General Carbon-Monoxide Safety

• U

sing a combustion engine indoors CAN

KILL IN MINUTES. Engine exhaust

contains carbon-monoxide – a poison you

cannot smell or see.

• Use combustion engines OUTSIDE only,

and far away from windows, doors, and

vents.

General Equipment Use and Care

• K

eep packaging away from children and

pets, potential risk of suffocation or

choking.

• The equipment is designed for domestic

use only.

• Handle the equipment safely and carefully.

• Before use, inspect the equipment for

misalignment or binding of moving parts,

loose components, damage, or any other

condition that may affect its operation. If

damaged, have the equipment repaired by

an authorised service centre or technician

before use.

• Prevent unintentional starting of the

equipment - ensure equipment and power

switches are in the OFF position before

connecting or moving equipment. Do not

carry equipment with hands or fingers

touching any controls. Remove any tools or

other items that are not a part of the

equipment from it before starting or

switching on.

• Do not force the equipment. Use the

correct equipment for your application.

Equipment will perform better and be safer

when used within its design and usage

parameters.

• Use the equipment and accessories etc. in

accordance with these instructions,

considering working conditions and the

work to be performed. Using the equipment

for operations different from those intended

could result in hazardous situations.

• Always keep equipment components

(engines, hoses, handles, controls, frames,

housings, guards etc) and accessories

(cutting tools, nozzles, bits etc) properly

maintained. Keep the equipment clean and,

where applicable, properly lubricated.

• Store the equipment out of reach of

children or untrained persons. To avoid

burns or fire hazards, let the equipment

cool completely before transporting or

storing. Never place or store the equipment

near flammable materials, combustible

gases, or liquids etc.

• The equipment is not weather-proof, and

should not be stored in direct sunlight, at

high ambient temperatures or locations that

are damp or humid.

• Do not clean equipment with solvents,

flammable liquids, or harsh abrasives.

• For specific equipment safety use and care,

see Equipment Safety.

POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE

POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE

BW4 Leaf Blower Kit

E&OE © PowerBlade 3

General Electrical Safety

• I

nspect electrical equipment, extension

cords, power bars, and electrical fittings for

damage or wear before each use. Repair or

replace damaged equipment immediately.

• Ensure all power sources conform to

equipment voltage requirements and are

disconnected before connecting or

disconnecting equipment.

• When wiring electrically powered

equipment, follow all electrical and safety

codes.

• Always use a Residual Current Device

(RCD) (GFCI) / Earth Leakage Circuit

Breaker / Safety Switch when operating this

item (electrical items only).

• High voltage / high current power lines may

be present. Use extreme caution to avoid

contact or interference with power lines.

Electrical shock can be fatal.

General Electrical Safety

• E

lectrically grounded equipment must have

an approved cord and plug and be

connected to a grounded electrical outlet.

• Do NOT bypass the ON/OFF switch and

operate equipment by connecting and

disconnecting the electrical cord.

• Do NOT use equipment that has exposed

wiring, damaged switches, covers or

guards.

• Do NOT use electrical equipment in wet

conditions or in damp locations.

• Do NOT use electrical cords to lift, move or

carry equipment.

• Do NOT coil or knot electrical cords, and

ensure electrical cords are not trip hazards.

General Service Information

• T

he equipment must be serviced or

repaired at authorised service centres by

qualified personnel only.

• Replacement parts must be original

equipment manufacturer (OEM) to ensure

equipment safety is maintained.

• Do NOT attempt any maintenance or repair

work not described in this manual.

• After use, the equipment and components

may still be hot – allow the equipment to

cool and disconnect spark plugs and/or

electrical power sources and/or batteries

from it before adjusting, changing

accessories, or performing repair or

maintenance.

• Do NOT adjust while the equipment is

running.

• Perform service-related activities in suitable

conditions, such as a workshop.

• Replace worn, damaged or missing

warning/safety labels immediately.

Child Choking Hazard!

• W

ARNING: CHOKING HAZARD - CHILDREN UNDER 8 YRS. CAN CHOKE OR SUFFOCATE ON SMALL PARTS. ADULT

SUPERVISION REQUIRED.

• Carefully inspect anything a baby or child could gain access to, including this product & packaging.

• Dangers include anything of a size that could become stuck or lodged in a baby or child's airway.

• Dangers include things like raw, hard fruit and vegetable pieces, large pieces of meat, bones or sausage skins, popcorn, nuts,

hard lollies and corn chips, small magnets and batteries, coins, beads, marbles and small uninflated balloons, broken toys and smaller toys,

buttons, keys, and coins. But there are also many more.

• Pay particular attention to accessories, nuts, bolts, screws, washers, caps, covers, loose parts, parts that could be removed or break off, pieces

of packaging, staples, tape etc.

• In the case of any doubt, secure the item of concern in an appropriate manner, or completely remove the possibility of access by a baby or child.

Important Leaf Blower Safety

• W

ARNING: Only use the authorised battery cartridges and chargers. The use of any other battery cartridges and chargers may cause

injury and/or damage.

• WARNING: Do not use a corded power supply, such as a battery adapter or portable power pack, with this machine. The cable of such

a power supply may hinder operation and result in personal injury.

• NOISE: The stated noise emission values are measured using a standard test method and may be used to compare one tool with another. The

declared noise emission values may also be used for a preliminary assessment of exposure.

• VIBRATION: The vibration total value (triaxial vector sum) has been determined according to EN 22841-1 and EN 50636-2-100.

• VIBRATION EMISSION (ah): 3.44 m/s² or less (Uncertainty K: 1.9 m/s²).

• NOTE: The declared vibration total value has been measured in accordance with a standard test method and may be used for comparison with

another tool.

• NOTE: The declared vibration total value may also be used for a preliminary assessment of exposure.

Intended Use

• T

he blower is designed for clearing leaves. This appliance is intended for consumer use only.

Safety Instructions

• W

ARNING! When using mains-powered or cordless appliances, basic safety precautions, including the following, should always be

followed to reduce the risk of fire, electric shock, personal injury, and material damage:

• Read all of this manual carefully before operating the appliance.

• The intended use is described in this manual. The use of any accessory or attachment, or the performance of any operation with this appliance

other than those recommended in this instruction manual, may present a risk of personal injury.

• Retain this manual for future reference.

Using Your Blower

• A

lways take care when using the blower.

• Always use safety glasses or goggles.

• Never allow children, persons with reduced physical, sensory, or mental capabilities, or those lacking experience and knowledge, or people

unfamiliar with these instructions to use the machine. Local regulations may restrict the age of the operator. Never operate the machine while

people, especially children, or pets are nearby.

POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE

POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE

BW4 Leaf Blower Kit

E&OE © PowerBlade 4

• Do not allow children or animals to come near the work area or touch the blower or power supply cord.

• Close supervision is necessary when the blower is used near children.

• This blower is not intended for use by young or infirm persons without supervision.

• This blower is not to be used as a toy.

• Only use the blower in daylight or good artificial light.

• Use in a dry location only. Do not allow the blower to become wet.

• Avoid using the blower in bad weather conditions, especially when there is a risk of lightning.

• Do not immerse the blower in water.

• Do not open the body casing. There are no user-serviceable parts inside.

• Do not operate the blower in explosive atmospheres, such as in the presence of flammable liquids, gases, or dust.

• The blower is only to be used with the power supply unit provided with it.

Residual Risks

Additional residual risks may arise when using the tool that may not be included in the enclosed safety warnings. These risks c

an result from

misuse, prolonged use, etc. Even with the application of relevant safety regulations and the implementation of safety devices, certain residual risks

cannot be avoided. These include:

• Injuries caused by touching any rotating or moving parts.

• Injuries caused when changing any parts, blades, or accessories.

• Injuries caused by prolonged use of the tool. When using any tool for extended periods, ensure you take regular breaks.

• Impairment of hearing.

• Health hazards caused by inhaling dust generated when using the tool (for example, when working with wood, especially oak, beech, and MDF).

After Use

• When not

in use, the blower should be stored in a dry, well-ventilated place out of reach of children.

• Children should not have access to stored blowers.

• When the blower is stored or transported in a vehicle, it should be placed in the boot or secured to prevent movement due to sudden changes in

speed or direction.

Inspection and Repairs

• B

efore use, check the blower for damaged or defective parts. Inspect for breakage of parts and any other conditions that may affect its operation.

• Do not use the blower if any part is damaged or defective.

• Have any damaged or defective parts repaired or replaced by an authorised repair agent.

• Never attempt to remove or replace any parts other than those specified in this manual.

Additional Safety Instructions for Blowers

The intended use is described in this manual. The use of any accessory or attachment, or the performance of any operation with this blower other

t

han those recommended in this instruction manual, can present a risk of personal injury and/or damage to property.

• To protect your feet and legs while operating the blower, always wear heavy-duty footwear and long trousers.

• Always switch off your product, allow the fan to stop, and remove the battery when:

• You leave your product unattended.

• Clearing a blockage.

• Checking, adjusting, cleaning, or working on your product.

• If the blower starts to vibrate abnormally.

• Do not place the inlet or outlet of the vacuum near eyes or ears when operating. Never blow debris in the direction of bystanders.

• Do not use in the rain or leave outdoors while it is raining.

• Do not cross gravel paths or roads while your product is switched on. Walk, never run.

• Do not place your unit down on gravel while it is switched on.

• Always be sure of your footing, particularly on slopes. Do not overreach and keep your balance at all times.

• Do not place any objects into the openings. Never use the blower if the openings are blocked—keep them free of hair, lint, dust, and anything that

may reduce airflow.

Vibration

The declared vibration emission values stated in the technical data and the declaration of conformity have been measured in accordance with a

s

tandard test method provided by EN 50636 and may be used for comparing one tool with another. The declared vibration emission value may also

be used in a preliminary assessment of exposure.

WARNING! THE VIBRATION EMISSION VALUE DURING ACTUAL USE OF THE POWER TOOL CAN DIFFER FROM THE DECLARED

VALUE DEPENDING ON HOW THE TOOL IS USED. THE VIBRATION LEVEL MAY INCREASE ABOVE THE STATED LEVEL.

When assessing vibration exposure to determine the safety measures required by 2002/44/EC to protect persons regularly using power tools in

employment, an estimation of vibration exposure should consider the actual conditions of use and the way the tool is used, including taking into

account all parts of the operating cycle, such as the times when the tool is switched off and when it is running idle, in addition to the trigger time.

Warning! Always use your product in the manner outlined in this manual. Your product is designed to be used in an upright mode, and if it is used in

any other way, it may result in injury. Never run your product while lying on its side or upside down.

POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE

POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE

BW4 Leaf Blower Kit

E&OE © PowerBlade 5

• The operator or user is responsible for accidents or hazards occurring to other people or their property.

• Do not use solvents or cleaning fluids to clean your product. Use a blunt scraper to remove grass and dirt.

• Keep all nuts, bolts, and screws tight to ensure that the blower is in safe working condition.

Safety of Others

• T

his blower is not intended for use by persons (including children) with reduced physical, sensory, or mental capabilities, or lack of experience

and knowledge, unless they have been given supervision or instruction concerning the use of the blower by a person responsible for their safety.

• Children should be supervised to ensure that they do not play with the blower.

Garden Blower Safety Warnings

• D

o not use the machine in bad weather conditions, especially when there is a risk of lightning. This decreases the risk of being struck by

lightning.

• Wear eye protection and ear protection. Adequate protective equipment will reduce the risk of personal injury.

• While operating the machine, always wear non-slip and protective footwear. Do not operate the machine when barefoot or wearing open sandals,

as this reduces the risk of injury to the feet.

• Do not wear loose-fitting clothing or articles such as scarves, strings, chains, ties, etc., that could get drawn into the air inlets. Tie back or cover

long hair to ensure it does not get drawn into the air inlets. If any of these items are drawn into the air inlets, it can increase the risk of personal

injury.

• Keep bystanders away while operating the machine. Thrown debris can increase the risk of personal injury.

• Never point the blower nozzle in the direction of people or pets, or in the direction of windows. Use extra caution when blowing debris near solid

objects, such as trees, automobiles, and walls that can cause debris to ricochet. Thrown objects can damage property and increase the risk of

personal injury.

• Do not use the machine to pick up or blow anything that is burning or smoking, such as cigarettes, matches, or hot ashes. These ignition sources

may increase the risk of fire.

• Do not touch the fan while it is still in motion. Turn off the machine and wait until the fan stops before removing any part that may give access to

the fan. This reduces the risk of injury from moving parts.

• When clearing jammed material or servicing the machine, make sure the power switch is off. Unexpected starting of the machine while clearing

jammed material or servicing may result in serious personal injury.

Additional Safety Instructions for Batteries and Chargers

BATTERIES:

• N

ever attempt to open the battery for any reason.

• Do not expose the battery to water.

• Do not store the battery in locations where the temperature may exceed 40°C.

• Charge only at ambient temperatures between 5°C and 35°C.

• Charge only using the charger provided with the tool.

• When disposing of batteries, follow the instructions given in the section "Protecting the Environment."

CHARGERS:

• Use your authorised charger only to charge the battery in the tool with which it was supplied. Other batteries could burst, causing personal injury

and damage.

• Never attempt to charge non-rechargeable batteries.

• Have defective cords replaced immediately.

• Do not expose the charger to water.

• Do not open the charger.

• Do not probe the charger.

• The charger is intended for indoor use only.

• Read the instruction manual before use.

Electrical Safety

• Y

our charger is double insulated; therefore, no earth wire is required. Always check that the mains voltage corresponds to the voltage on the

rating plate. Never attempt to replace the charger unit with regular mains plug.

• If the supply cord is damaged, it must be replaced by the manufacturer or an authorised Service Centre in order to avoid a hazard.

Protecting the Environment

• S

eparate collection: Products and batteries marked with this symbol must not be disposed of with normal household waste.

• Products and batteries contain materials that can be recovered or recycled, reducing the demand for raw materials. Please recycle electrical

products and batteries according to local regulations

Additional Safety Instructions for Your Battery Charger

WARNING: RE

AD ALL SAFETY WARNINGS AND INSTRUCTIONS. FAILURE TO FOLLOW THE WARNINGS AND INSTRUCTIONS MAY

RESULT IN ELECTRIC SHOCK, FIRE, AND/OR SERIOUS INJURY. SAVE ALL WARNINGS AND INSTRUCTIONS FOR FUTURE

REFERENCE.

This appliance can be used by children aged 8 years and above, and by persons with reduced physical, sensory, or mental capabilities, or lack of

experience and knowledge, if they have been given supervision or instruction concerning the use of the appliance in a safe way and understand the

POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE

POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE

BW4 Leaf Blower Kit

E&OE © PowerBlade 6

hazards involved. Children shall not play with the appliance. Cleaning and user maintenance shall not be carried out by children without

supervision.

If the supply cord is damaged, it must be replaced by the manufacturer, its service agent, or similarly qualified persons in order to avoid a hazard.

• Before charging, read the instructions. After charging, disconnect the battery charger from the supply mains. Then remove the chassis connection

and then the battery connection.

• Do not charge a leaking battery.

• Do not use chargers for purposes other than those for which they are designed.

• Before charging, ensure your charger matches the local AC supply.

• For indoor use only, do not expose to rain.

• The charging device must be protected from moisture.

• Do not use the charging device outdoors.

• Do not short out the contacts of the battery or charger.

• Respect the polarity “+/-” when charging.

• Do not open the unit and keep it out of the reach of children.

• Do not charge batteries from other manufacturers or incompatible models.

• Ensure that the connection between the battery charger and battery is correctly positioned and not obstructed by foreign objects.

• Keep the battery charger’s slots free of foreign objects and protect them from dirt and humidity. Store in a dry and frost-free place.

• When charging batteries, ensure that the battery charger is in a well-ventilated area and away from flammable materials. Batteries can get hot

during charging. Do not overcharge any batteries. Ensure that batteries and chargers are not left unsupervised during charging.

• Do not recharge non-rechargeable batteries, as they can overheat and break.

• Longer life and better performance can be obtained if the battery pack is charged when the air temperature is between 18°C and 24°C. Do not

charge the battery pack in air temperatures below 5°C or above 35°C. This is important as it can prevent serious damage to the battery pack.

• Charge only battery packs of the authorised same model.

POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE

POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE

BW4 Leaf Blower Kit

E&OE © PowerBlade 7

Safety Symbols

The product may have safety warning labels attached to it, explained below. Understand the symbols on your

product and their meanings. If any stickers become unreadable, unattached etc., replace them.

Flammable Material Hazard

Flammable liquids, gases, or

substances etc may present.

Avoid ignition sources and open

flames. Danger of fire.

Read User Manual

Read and fully understand

product safety warnings,

operation, procedures etc before

using the product.

Use Hand Protection

Wear appropriate hand protection

and take due care as the product

or use of the product may present

hand hazards.

Carbon-Monoxide Hazard

Do not use the product in

confined areas or without

adequate ventilation. Carbon-

monoxide poisoning can be fatal.

Electrocution / Electrical Shock

Hazard

High voltage or high current

electricity may be present or

required by the product. Take

due care when handling electrical

products, cables, plugs and

leads. Electrical shock can be

fatal.

Toxic Fumes / Dust Hazard

Using the product or by-products

from use may produce fumes,

smoke or particles that could be

harmful if inhaled. Wear

appropriate breathing protection

and have adequate ventilation.

Explosive Material Hazard

Combustible liquids, gases, or

substances etc may be present.

Avoid ignition sources and open

flames. Danger of explosion.

Cutting / Amputation Hazard

The product may have blades,

edges or mechanical devices that

can cause severe cut injury to

fingers, limbs etc. Take due care

when handling and using the

product.

Crush Hazard

The product may have blades,

edges or mechanical devices that

can cause severe crush injury to

fingers, limbs etc. Take due care

when handling and using the

product.

Single Operator Only

The product must be operated by

a single person only. More than

one person operating the product

may introduce additional hazards.

Use Face Protection

Wear appropriate full-face

protection and take due care as

the product or use of the product

may present face and eye

hazards.

Use Foot Protection

Wear appropriate foot protection

and take due care as the product

or use of the product may present

foot hazards.

Use Eye / Ear / Head Protection

Wear appropriate eye and / or

ear and / or head protection and

take due care as the product or

use of the product may present

eye, hearing, and head hazards.

Running Hazard

Do not run on or near the product

as doing so may present a fall

hazard.

Diving Hazard

Do not dive into the product as

doing so may present a neck /

head injury hazard.

Adult Supervision Required

Always supervise children and

other users of a product to

prevent drowning or injury.

Skin Penetration / Puncture

Hazard

The product may produce

pressure, emit liquids or objects

that can cause severe injury to

fingers, limbs, blood etc. Take

due care when handling and

using the product.

Hot Surface Hazard

Be aware that the product may

produce high temperatures and

hot surfaces that can cause burn

injuries.

Flying Debris Hazard

Be aware that the product or use

of the product may present

hazards produced by flying

debris. Wear appropriate clothing

and protective devices.

Moving Parts Hazard

Be aware that the product

contains or uses mechanical

devices that move or rotate.

Always wait for moving parts to

stop fully before handling the

product, adjusting, maintenance

etc.

POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE

POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE

BW4 Leaf Blower Kit

E&OE © PowerBlade 8

Carbon-Monoxide Hazard

Do not use the product in

confined areas or without

adequate ventilation. Carbon-

monoxide poisoning can be fatal.

Pull Hazard

Be aware that the product

contains or uses mechanical

devices that can pull in objects

and can cause severe injury to

fingers, limbs etc. Take due care

when handling and using the

product.

Slope / Fall Injury Hazard

Be aware that using the product

on sloping surfaces or in slippery

conditions may present additional

dangers from falls and contact

with blades, moving parts, hot

surfaces etc.

"Slam Dunk" Warning

Do NOT attempt "slam dunk"

manoeuvres as this may result in

severe injury due to falling,

product breakage or collapse etc.

Electrocution / Electrical Shock

Hazard - Outdoor

High voltage or high current

electricity may be present or

required by the product. Do NOT

use in rain, damp, or wet

conditions. Electrical shock can

be fatal.

Electrocution / Electrical Shock

Hazard - Disconnect

High voltage or high current

electricity may be present or

required by the product. Always

disconnect the product from the

electrical supply before handling

the product, adjusting,

maintenance etc.

Power Line Electrocution

Hazard

High voltage / high current power

lines may be present. Use

extreme caution to avoid contact

or interference with power lines.

Electrical shock can be fatal.

"Kick-Back" Hazard

High level of "kick-back" hazard

that can cause the machine to

suddenly rotate towards operator.

Kick-back injury can be fatal.

Winch Operator Position

Hazard

Do NOT stand between winch

and load. Do NOT use winch to

move people.

Winch Lift Hazard

Do NOT LIFT load vertically. Use

machine to PULL only.

Cable Hazard

Ensure that load bearing cable is

not kinked or knotted.

Winch Cable Hazard

Ensure that there is a minimum

number of cable coils on

winching mechanism.

Winch Hook Hazard

Carry hook to load – do NOT

throw or run.

Flash / Blinding Hazard

Wear appropriate eye protection

for welding. Direct exposure to

weld arcs may cause permanent

eye injury.

Laser Hazard

Laser may be in use – do NOT

look directly at laser or allow

others to.

Choking Hazard

Children under 8 yrs. Can choke

or suffocate on small parts. Adult

supervision required.

POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE

POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE

BW4 Leaf Blower Kit

E&OE © PowerBlade 9

Table of Contents

Safety ......................................................................................................................................................... 2

Safety Symbols ........................................................................................................................................................... 7

Assembly ................................................................................................................................................. 10

To Fit the Blower Tube ............................................................................................................................................. 10

To Install the Battery Pack ........................................................................................................................................ 11

Switching On and Off ................................................................................................................................................ 11

Operation ................................................................................................................................................. 12

General Operation .................................................................................................................................................... 12

To Remove the Battery Pack .................................................................................................................................... 12

Charging the Battery ................................................................................................................................................. 13

Lithium Battery Care and Maintenance .................................................................................................. 15

Top 3 Battery Care Requirements ............................................................................................................................ 15

Maintenance ............................................................................................................................................. 17

Troubleshooting ...................................................................................................................................... 18

Specifications .......................................................................................................................................... 19

POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE

POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE

BW4 Leaf Blower Kit

E&OE © PowerBlade 10

Assembly

To Fit the Blower Tube

1. Align the notches on the cordless turbine jet blower body with the notches on the upper blower tube and

slide them together until they click into place.

2. Repeat this process with the upper tube and the lower tube, ensuring they click into place.

POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE

POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE

BW4 Leaf Blower Kit

E&OE © PowerBlade 11

To Install the Battery Pack

Insert the battery pack into the tool until an audible click is heard, as shown below. Ensure the battery pack is

fully seated and securely latched into position.

Switching On and Off

WARNING! Use both hands to grip the product firmly when switching on. Do not point the unit's

discharge at yourself or bystanders.

•

To switch the blower on, slide the on/off switch forward.

•

To switch the cordless turbine jet blower off, slide the on/off switch back.

POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE

POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE

BW4 Leaf Blower Kit

E&OE © PowerBlade 12

Operation

WARNING! Always wear safety glasses. Wear a filter mask if the operation is dusty. The use of gloves,

long trousers, and substantial footwear is recommended. Keep long hair and loose clothing away from

openings and moving parts. THIS TURBINE JET BLOWER IS FOR HOUSEHOLD USE ONLY.

General Operation

Hold the cordless turbine jet blower with one hand, as shown below, and sweep from side to side with the nozzle

several inches above the ground. Slowly advance, keeping the accumulated pile of debris in front of you.

To Remove the Battery Pack

Depress the battery release button on the battery pack and pull the battery pack out of the tool assembly.

POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE

POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE

BW4 Leaf Blower Kit

Charging the Battery

USE THE BATTERY CHARGER ONLY WITH AUTHORISED 20V LITHIUM-ION BATTERIES.

Battery packs are shipped in a low charge condition to prevent possible issues. Therefore, you should charge

them prior to use.

NOTE: Batteries will not reach full charge the first time they are charged. Allow several cycles (operating

the tool followed by recharging the batteries) for them to fully charge.

To Charge

1. Use this battery charger only with

authorised 20V Lithium-ion batteries.

2. Ensure the power supply is normal

house voltage, 220-240 volts, 50 Hz,

AC only.

3. Connect the charger to the power

supply. The light will be GREEN,

indicating that the power is on.

4. Slide the battery pack into the

charger.

5. Press down on the battery pack to

ensure the contacts on the battery

pack engage properly with the

charger contacts.

6. The charger light will illuminate. A

constant RED light indicates the

battery is charging. A constant

GREEN light indicates the battery is

fully charged.

7. A minimum charge time of 80

minutes is required to recharge a

completely discharged battery pack.

8. The battery pack will become slightly

warm to the touch while charging.

This is normal and does not indicate

a problem.

9. DO NOT place the charger in an area of extreme heat or cold. It will work best at normal room temperature.

10. - When the battery is fully charged, unplug the charger from the power supply and remove the battery pack.

POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE

POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE

BW4 Leaf Blower Kit

Battery Capacity

By pressing the button, the LED display shows the battery capacity.

LED Function of Charger

The LED will light up to indicate the status of the charger and battery pack:

•

One constant green LED with no battery installed = Power is on.

•

One constant red LED = Battery pack is charging.

•

One constant green LED = Battery pack is fully charged.

Important Information for Recharging Hot Batteries

When using a tool continuously, the battery pack may become hot. You should allow a hot battery pack to cool

down for approximately 30 minutes before attempting to recharge it.

NOTE: If the charger does not charge your battery pack under normal circumstances, please contact the

manufacturer or an authorised service centre.

POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE

POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE

BW4 Leaf Blower Kit

Lithium Battery Care and Maintenance

Top 3 Battery Care Requirements

1. Charge battery before first use. The battery may arrive with some charge, regardless of this the

battery must be charged for 1.5 hours on the initial charge and 1.5 hours for each subsequent

charge.

2. Charge battery immediately when it is depleted. Do not store a depleted battery. This will

permanently impact the life of the battery. If the battery is going to be stored for a period of time, fully

charge the battery before storing.

3. Disconnect battery when not in use. To prolong the life of a battery, disconnect it from the unit

when not in use. Disconnect chargers from the battery once charged.

To ensure the battery maintains optimum performance, follow the guidelines outlined below.

•

For best results, charge batteries in temperatures between 10°C and 30°C

•

When battery is charged, disconnect the charger from the power supply and remove the battery from the

charger.

•

If a battery is stored or otherwise unused for an extended period, and the battery has no charge remaining

when you check it, consider it to be damaged. Do not attempt to recharge it or to use it. Replace it with a

new battery.

•

Use only with the battery charger specified by the manufacturer.

•

Ensure that the battery charger electrical cord is not subjected to damage or stress. Do not operate the

battery charger if it has a damaged electrical cord or plug.

•

Do not use the charger in wet areas or expose it to rain or water.

•

The typical estimated life of a Lithium-Ion battery is about two to three years or 300 to 500 charge cycles,

whichever occurs first. One charge cycle is a period of use from fully charged, to fully discharged, and fully

recharged again.

•

Explosion hazard – protect the battery against heat, for example, direct sunlight and fire. Do not store

batteries in vehicles or locations subject to heat.

•

Batteries can explode in the presence of an ignition source, such as a pilot light. To reduce the risk of

serious personal injury, never use any cordless product in the presence of open ﬂame. Exploding batteries

can propel debris and chemicals.

•

Do not open the battery – danger of short-circuiting and/or explosion.

•

Do not attempt to destroy or disassemble the battery pack or remove any of its components.

•

Do not touch the battery terminals with metal objects and/or body parts as short-circuit and/or personal injury

may result.

•

Explosion hazard – do not open and/or short-circuit the battery.

•

Poison hazard – battery leakage (liquid ejection). Under extreme conditions, liquid may be ejected from the

battery – avoid contact. If contact accidentally occurs, immediately seek medical attention, and flush with

water. If liquid contacts eyes, immediately seek medical attention, flush with clean water for at least 10

minutes. Liquid ejected from the battery may cause irritation or burns.

•

Dispose of non-serviceable batteries in an environmentally responsible manner and according to local

regulations.

Failure to adhere to the requirements above may result in the battery becoming inoperative or battery life being

reduced. In extreme cases or abuse, battery overheating, or fire may result.

POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE

POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE

BW4 Leaf Blower Kit

POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE

POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE

BW4 Leaf Blower Kit

Maintenance

•

When servicing, use only identical replacement parts. The use of any other parts may create a hazard or

cause product damage.

•

Do not allow brake fluids, gasoline, petroleum-based products, penetrating oils, etc., to come into contact

with plastic parts at any time. These substances contain chemicals that can damage, weaken, or destroy

plastic.

•

DO NOT abuse power tools. Abusive practices can damage tools as well as the workplace.

•

Do not attempt to modify or create accessories not recommended for use with the charger. Any such

alteration or modification is misuse and could result in a hazardous condition, leading to possible serious

personal injury.

POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE

POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE

BW4 Leaf Blower Kit

Troubleshooting

Problem Possible Cause Possible Solution

Unit will not start.

Battery not installed properly. Check battery installation.

Battery not charged. Check battery charging requirements.

Battery will not charge.

Battery not inserted into charger.

Insert battery into charger until the

green LED appears.

Charger not plugged in.



Plug charger into a working outlet.

Refer to "Important Charging

Notes" for more details.



Check the current at the

receptacle by plugging in a lamp

or other appliance.



Check to see if the receptacle is

connected to a light switch that

turns power off when you turn out

the lights.

Surrounding air temperature too hot or

too cold.

Move charger and tool to a location

with a surrounding air temperature

above 40°F (4.5°C) or below 105°F

(+40.5°C).

POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE

POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE

BW4 Leaf Blower Kit

Specifications

Product Type Leaf Blower

Power Type Battery

Battery Voltage 20V

Battery Type Lithium Ion

Battery Capacity 2.0Ah

Leaf Blower Runtime Up to 101 Min

Max Airflow 160km/h

Charger 240V

Charge Time 90mins

Power Plug Australian Standard

Note: Requires minimal assembly

POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE

POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE

Some experts believe that the incorrect or prolonged use of almost any

product may cause serious injury or death. To help reduce your risk of

serious injury or death, refer to the information below. For more information,

see www.datastreamserver.com/safety



Consult all documentation, packaging,

and product labelling before use. Note

that some products feature

documentation available online. It is

recommended to print and retain the

documentation.



Before each use, check the product for

loose/broken/damaged/missing parts,

wear, or leaks (if applicable). Never use a

product with

loose/broken/damaged/missing parts,

wear, or leaks.



Products must be inspected and serviced

(if applicable) by a qualified technician

every 6 months. This is based on

average residential use by persons of

average size and strength, and on a

property of average metropolitan size.

Use beyond these recommendations may

require more frequent

inspections/servicing.



Ensure that all users of the product have

completed a suitable industry recognised

training course before being allowed

access to the product.



The product has been supplied by a general merchandise

retailer that may not be familiar with your specific

application or description of application. Be sure to attain

third-party approval from a qualified specialist for your

application before use, regardless of any assurances from

the retailer or its representatives.



This product is not intended for use where fail-safe

operation is required. As with any product (for example,

automobile, computer, toaster), there is the possibility of

technical issues that may require the repair or

replacement of parts, or the product itself. If the possibility

of such failure and the associated time it may take to

rectify could in any way inconvenience the user, business,

or employee, or financially affect the user, business, or

employee, then the product is not suitable for your

requirements. This product is not intended for use where

incorrect operation or a failure of any kind, including but

not limited to, a condition requiring product return,

replacement, parts replacement, or service by a

technician may cause financial loss, loss of employee

time or an inconvenience requiring compensation.



If this product has been purchased in error when

considering the information presented here, contact the

retailer directly for details of their returns policy, if

required.

diagrams, or images may be reproduced or transmitted in any form or by any means, electronic or

mechanical, including photocopying, scanning, or recording, or any information storage and retrieval system,

without express permission or consent from the publisher.

Powerblade BW4 20V Cordless Leaf Blower Kit Battery and Fast Charger for Efficient Garden Care BLWHCSPBBL2A

Product's Documents

Product manual

Specifications

POWERBLADE BLWHCSPBBL2A Questions and Answers